Extrac-Tec HPC-30 Trommel ID: 96360

• Maximum feed approx. 6-8 tons/hour of fine material.
  • 1/3 in. (8mm) minus.
• Concentrator belt and trommel are independently driven.
• Digital variable frequency controller housed within a waterproof enclosure.
  • 2.2 kW (3.0 HP) 3 phase drive motor.
  • Reduction gearbox.
• HPC-30 requires approx. 100 gallons/minute.
• Scrubbing & Screening trommel is 168 in. (4.27 m) long x 20 in. (0.5 m) diameter.
  • 100 in. (2.5 m) 2-stage scrubber.
  • Trommel inclination, height, and speed are independantly adjustable.
• Feed hopper designed to receive feed from 18 in. (450 mm) conveyor.

• HPC FC-30 Feeder.
• Feeder is custom designed to suit HPC-30 Trommel.
• Hopper built with 1/4 in. plate steel with approx. 6 ton capacity.
• 6 ft x 8 ft top opening with 3 in. grizzly.
• Extendable support legs.
• 18 in. radial control gate (manual).
• 18 in. x 18 ft. long conveyor.
• 3 hp (2.2kW) electric motor.
• 3 phase 380-480 volt electrical supply required.
• Shaft mounted gear reduction V-belt drive.
• Lagged head pulley and wing tail pulley.
• 2 ply conveyor belting with 3/16 in. x 1/16 in. covers.
• VFD controller for speed adjustment with detachable cabinet which mounts on HPC-30.
• Mobile single axle design.