Iron Ore Roasting Rotary Kiln for Sale
Savona Equipment is your supplier for new, used, and rebuilt ore roasting rotary kiln. There are two basic types of rotary kilns; direct fired and indirect fired. Rotary Kilns are a pyroprocessing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include: They are also used for roasting a wide variety of sulfide ores prior to metal extraction. The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. The fuel for this may be gas, oil, pulverized petroleum coke or pulverized coal. Rotary kilns are used to heat solids to the point where a required chemical reaction(s) takes place. The rotary kiln is basically a rotating inclined cylinder.
3 ft x 6 ft Rotary Roasting KilnDryer Drum 36in. Dia. X 6ft. long. Natural gas fired Honeywell burner. Electric hydraulic drive system. Chain drive to drum. All on ID: 99759SoldQuote +