Wanted EquipmentSell Your Equipment Financing Now Available
Wanted Equipment
Please provide us with as much detail as possible and we will get back to you.
Wood Pellet Plant ID: 134077
- Wood Pellet Plant.
- 5 to 8 tons per hour.
- Put into operation late 2010 and closed early 2015 due to inconsistent wood supply.
- Rated to produce 30,000 tons per year.
- Complete with:
- Log Deck.
- 70 in. three blade disk type chipper with bottom discharge.
- Reconditioned with 300 hp HD motor with less than 500 hours.
- Lots of spare blades.
- Belt live bed.
- 20 in. top screw for distribution of chips with hydraulic pump.
- Bliss 300 hp hammer mill.
- Hammers replaced 4 months before shutdown.
- Can produce up to 10 tons per hour of ¼ in. minus chips.
- Spare screens.
- Hammer mill cyclone with explosion top piping.
- Fine dust cyclone.
- 3 of top and bottom screw ¼ chip bin.
- Refiner used for partial drying of very wet wood.
- Bliss 500 hp Pellet mill.
- Reconditioned in 2009 and 2015.
- New main shaft, bearings. New main rings manufactured and assembled by Bliss.
- 2 new matching 250 hp HD motors were installed with 200 hours of use.
- Reconditioned in 2009 and 2015.
- Crumbler.
- Counterflow 5 ton cooler.
- With cyclone and fan.
- Screeners.
- 1 by Rotex.
- 1 by CME.
- 18 ton recycle bin.
- 18 ton pellet finishing bin.
- Auto bagger (similar to Rethceif Model VFF-5020).
- Bags up to 10 tons per hours.
- Fully computerized.
- Also includes a sealer and a manual bagger.
- Forklift.
- Electrical control room.
- Electrical control panel.
- Moisture meter.
- Lot of screw conveyors and buckete elevators.
- Several bins and silos.
- Size of plant area is 10,000 ft² (two tents at 5,000 ft² each).
- The above listings is partial and not all available items are listed.
- Plant is reported to be in excellent condition.
- Dismantling and loading available for an additional cost.
- 2 building tents available for an additional cost.
- 5 to 8 tons per hour.
Please contact us for more information.