Wanted EquipmentSell Your Equipment Financing Now Available
Needed Equipment
Please provide us with as much detail as possible and we will get back to you.
2011 Atlas Copco CS14 Diamond Core Drill ID: 1106332
2011 Atlas Copco CS14 Diamond Core Drill
-
Make: Atlas Copco Epiroc
-
Model: CS14
-
Engine: Cummins QSB6.7 Diesel
-
Hours: 8500 Approx.
- Included In Package
- CS14 Drill
- Hydraulic Controls
- Heavy Duty Skid
- Enclosure with fold out work platforms
- Pump
- Hoist
- Wireline
-
Condition: Good, Used
-
Location: British Columbia, Canada
-
General Specifications:
- Depth capacity coring (wireline or conventional)
B wireline 1540 m (5052 ft)
N wireline 1200 m (4042 ft)
H wireline 800 m (2695 ft)
P wireline 475 m (1558 ft)
Depth are based on vertical hole - Main hoist
Single line capacity: Bare drum 80 kN (18,000 lb)
Line speed: Bare drum 44 m/min (148 ft/min)
Cable size: 35 m (118 ft) x 16 mm (10/16 in) - Wireline Capacity:
- 1830 m (6000 ft) of 4.76 mm (3/16 in)
- 975 m (3200 ft) of 6.35 mm (1/4 in)
- Line pull: bare drum: 11.9 kN (2665 lb)
full drum: 3.0 kN (668 lb) - Line speed: bare drum 114 m/min (374 ft/min)
full drum 453 m/min (1486 ft/min) - Mast and feed system
- Feed travel: 3.5 m (11.5 ft)
- Feed speeds: fast and slow with variable control
- Thrust: 59.6 kN (13,390 lb)
- Pull: 138 kN (31,020 lb)
- Drilling angle: 45 to 90 degrees
- Rod pull length: 6.09 m (20 ft)
- Power unit
- Manufacture: Cummins
- Model: QSB6,7 Tier III
- Volume: 6.7 liter 6 cylinder
- Power: 153 kW (208 HP)
- RPM: 1800
- Engine type: Diesel turbocharged/after cooled
- Cooling: Water
- Hydraulic system
- Primary pump: 28 MPa – 242 l/min (4061 psi – 63.9 gal/min)
- Secondary pump: 20 MPa – 122 l/min (2901 psi – 32.2 gal/min)
- Auxiliary pump: 21.5 MPa – 47 l/min (3118 psi – 12.4 gal/min)
- Hydraulic oil cooling: Air
- Drillhead and spindle speeds
- Power: hydraulic motor – variable speed/reversible
- Final drive: 4 in chain driven in oil bath – 2,5 ratio
- Spindle (inner diameter): 117 mm (4 5/8 in)
- Spindle speeds:
Ratio Speed, RPM Torque, Nm (ftlb)
1st 6.63:1 117-196 5113-3051 (3771-2250)
2nd 3.17:1 245-410 2445-1459 (1803-1076)
3rd 1.72:1 451-756 1326-792 (978-584)
4th 1.00:1 776-1300 771-460 (569-340)
Range selection: manual control from operator’s station
Hinged head: swing away
- Depth capacity coring (wireline or conventional)
-
Chuck assembly
- Type: hydraulic open, spring closed
- Maximum inside diameter: 117 mm (4 5/8 in)
- Holding capacity: 18,143 kg (40,000 lb)
- Type: hydraulic open, spring closed
- Rod Holder
- Type: hydraulic open, gas spring closed
- Maximum inside diameter: 210 mm (8.3 in)
- Holding capacity: 13,000 kg (28,660 lb)
- Weight
CS14 incl. Trido140 and Rod Holder: 7,000 kg (15,430 lb) - Dimensions (L – W – H)
- In transport position (top mast removed):
6370 mm (21,45ft) 2200 mm (7,22ft) 2340 mm (7,88ft) - Transport on drill site (top mast folded):
6370 mm (21,45ft) 2550 mm (8,59ft) 2340 mm (7,88ft)
- In transport position (top mast removed):
View More Diamond Core Drills