Wanted Equipment by Customer Request ID: 378759

---

Our customers and partners around the world view our updated inventory every day but we also have a steady stream of inquiries for specific machines needed for their mining operations, crushing plants, and precious metal processing and recovery plants. If you have alluvial, underground or open pit mining equipment or processing and recovery equipment available please . We look forward to working with you to get your equipment sold and better serving each of our customer's specific equipment requirements. 

• Contact Us With Your Available Surplus Equipment  
• Call: 1-250-373-2424
• Email: 

Current Customer Requests - June 10, 2026

• 2-3 TPH Hard Rock Gravity Plant - Portable, Mounted on Trailers
  
  
• Metso Nordberg HP500 Cone Crusher
  
  
• Metso Nordberg HP400 Cone Crusher
  
  
• 500kW Diesel Generator - 600 Volt Output
  
  
• Gardner Denver Sutorbuilt 812-4500 CFM Blower Pack
  
  
• Haver Boecker Tyler 2ft. x 6ft. UML-Class Dewatering Screen
  
  
• Haver Boecker Tyler 3ft. x 10ft. UML-Class 2 Deck Rinse Screen
  
  
• New or Used Spare Trunnion Bearing For 11ft x 14ft Dominion Mill - 55in Dia. x 24in Wide Bearing Journal
  
  
• 8in - 12in Dia. Poly Pipe - DR-11 Rating, 3500ft Needed
  
  
• 6in Dia. Poly Pipe - Used, 2000ft+ Needed, DR-11
  
  
• Detroit Series 40 Diesel Engine - Replacement Unit for Model 63SH32, SNWO4763N1302010
  
  
• Face Sheet Pile Wall - AZ-26-700 or a PZ27 Cross-Section or Equals - Approx. 240ft Long of a 20ft Deep Wall, or a Square Footage of 4,800ft² 
  
  
• Atlas Copco ROC D7-11 Drill
  
  
• Gardner Denver SCH5000CL Rotary Drill
  
  
• Merrill Crowe Plant - 250 kg Per Hr. or Similar, Complete
  
  
• Symons 5.5ft Cone Crusher - Standard Head
  
  
• 4ft Cone Crusher - Can Be Older, Used Model
  
  
• 15.5ft Dia. X 17ft Long Ball Mill - Max Length is 17ft, with 2750HP Motor, 60 Hz, 4000V, Needed in Peru
  
  
• 6ft Dia. x 4ft Hardinge Conical Ball Mill
  
  
• 12B-Sized Muckers - Rail Mucker for 18 Gauge Track
  
  
• 30ft Diameter High-Rate Thickener - McLanahan HRT-E-10 or Similar
  
  
• 125HP Mine Hoist with Headframe - 5-6ft Diameter, Velocity: 394 ft/min (2m/sec), Depth: 2,700ft, Cable: 1in, Line Pull: 12,000 lbs. (5,443 kg)
  
  
• MSI Xtruder 255 Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• Kelsey J1800 Centrifugal Mineral Jig - 50 TPH or Equivalent
  
  
• Knelson KC-MD3 Concentrator
  
  
• Small Concentrating Tables - 2ft x 4ft and Smaller
  
  
• PMX 44in Gold Wheel
  
  
• Klondike Series 12 x 48 Longtom Clean-up Unit
  
  
• Black Gold Magnetic Separator - (2) Units Needed
  
  
• Denver 5in x 6in Lab Jaw Crusher - Must Be Denver Unit
  
  
• Bico Ring and Puck Mill
  
  
• 100 to 200 KW Indirect-Fired Electric Rotary Kiln - With Min. (2) Heating Zones that can be Controlled Independently
  
  
• Atlas Copco CS1000 Diamond Drill
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• 150 Yard Per Hour Trommel
  
  
• Surge Bin Feeder - 25-30 Yard Capacity
  
  
• 700-750 GPM Fire Pump House - Diesel Driven Preferred, Refurbished is OK, Needed in Eastern Canada
  
  
• 3000/4000 Gallon Mobile Diesel Fueling Tank - Fueling Dispenser & Hose Preferred, Needed in Eastern Canada
  
  
• Sandvik TH545I Underground Haul Truck - Under 2000 Hours
  
  
• CAT 740 Articulated Haul Trucks
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• 40-50ft Bridge - 30 Ton Capacity, 14ft Wide Max
  
  
• Forklift - 25,000 Lbs. Capacity, Propane or Electric Preferred
  
  
• 120 CY/HR Concrete Batch Plant - Dry Batch with 3 to 4 Agg Bins, Mobile or Easily Erected, Needed in Philadelphia Area
  
  
• Flexifloat Barge - 80-Ton Deck Capacity, Suitable for Driven Pile Operations and Marine Construction, Preferably with Spud Systems or Anchoring Arrangements
  
  
• Fruitland RCF500 (338 CFM) Fan Cooled Vacuum Pump
  
  
• Durst Hydraulic Pump Gearbox - KJ5 Model
  
  

Current Customer Requests - June 3, 2026

• Atlas Copco ROC D7-11 Drill
  
  
• Gardner Denver SCH5000CL Rotary Drill
  
  
• Merrill Crowe Plant - 250 kg Per Hr. or Similar, Complete
  
  
• Symons 5.5ft Cone Crusher - Standard Head
  
  
• Metso Nordberg HP500 Cone Crusher
  
  
• Metso Nordberg HP400 Cone Crusher
  
  
• 4ft Cone Crusher - Can Be Older, Used Model
  
  
• 15.5ft Dia. X 17ft Long Ball Mill - Max Length is 17ft, with 2750HP Motor, 60 Hz, 4000V, Needed in Peru
  
  
• 6ft Dia. x 4ft Hardinge Conical Ball Mill
  
  
• 12B-Sized Muckers - Rail Mucker for 18 Gauge Track
  
  
• 30ft Diameter High-Rate Thickener - McLanahan HRT-E-10 or Similar
  
  
• 125HP Mine Hoist with Headframe - 5-6ft Diameter, Velocity: 394 ft/min (2m/sec), Depth: 2,700ft, Cable: 1in, Line Pull: 12,000 lbs. (5,443 kg)
  
  
• MSI Xtruder 255 Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• Kelsey J1800 Centrifugal Mineral Jig - 50 TPH or Equivalent
  
  
• Knelson KC-MD3 Concentrator
  
  
• Small Concentrating Tables - 2ft x 4ft and Smaller
  
  
• PMX 44in Gold Wheel
  
  
• Klondike Series 12 x 48 Longtom Clean-up Unit
  
  
• Black Gold Magnetic Separator - (2) Units Needed
  
  
• Denver 5in x 6in Lab Jaw Crusher - Must Be Denver Unit
  
  
• Bico Ring and Puck Mill
  
  
• 100 to 200 KW Indirect-Fired Electric Rotary Kiln - With Min. (2) Heating Zones that can be Controlled Independently
  
  
• Atlas Copco CS1000 Diamond Drill
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Atlas Copco CS10 Diamond Drill - New or Used 
  
  
• Shaw Backpack Core Drill Package
  
  
• 150 Yard Per Hour Trommel
  
  
• Surge Bin Feeder - 25-30 Yard Capacity
  
  
• 700-750 GPM Fire Pump House - Diesel Driven Preferred, Refurbished is OK, Needed in Eastern Canada
  
  
• 3000/4000 Gallon Mobile Diesel Fueling Tank - Fueling Dispenser & Hose Preferred, Needed in Eastern Canada
  
  
• Sandvik TH545I Underground Haul Truck - Under 2000 Hours
  
  
• CAT 740 Articulated Haul Trucks
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• 40-50ft Bridge - 30 Ton Capacity, 14ft Wide Max
  
  
• Forklift - 25,000 Lbs. Capacity, Propane or Electric Preferred
  
  
• 120 CY/HR Concrete Batch Plant - Dry Batch with 3 to 4 Agg Bins, Mobile or Easily Erected, Needed in Philadelphia Area
  
  
• Flexifloat Barge - 80-Ton Deck Capacity, Suitable for Driven Pile Operations and Marine Construction, Preferably with Spud Systems or Anchoring Arrangements
  
  
• Terex Mobile Light Tower - Model RL4
  
  
• Fruitland RCF500 (338 CFM) Fan Cooled Vacuum Pump
  
  
• 6in Dia. Poly Pipe - Used, 2000ft+ Needed, DR-11
  
  
• Durst Hydraulic Pump Gearbox - KJ5 Model
  
  
• CAT 3408E Cat Cylinder Head Core - 1077320 Part Number
  
  

Current Customer Requests - May 27, 2026

• 30ft Diameter High-Rate Thickener - McLanahan HRT-E-10 or Similar
  
  
• Symons 5.5ft Cone Crusher - Standard Head
  
  
• Kelsey J1800 Centrifugal Mineral Jig - 50 TPH or Equivalent
  
  
• 15.5ft Dia. x 17ft Long Ball Mill - Max Length is 17ft, with 2750HP Motor, 60 Hz, 4000V, Needed in Peru
  
  
• Small Concentrating Tables - 2ft x 4ft and Smaller
  
  
• 125HP Mine Hoist with Headframe - 5-6ft Diameter, Velocity: 394 ft/min (2m/sec), Depth: 2,700ft, Cable: 1in, Line Pull: 12,000 lbs. (5,443 kg)
  
  
• Alimak Double-Drive Climber - With: Hose Reel, Alicab Unit, (4) Adjustable Post for a Stripping Deck, 90° Curve, (54) 2m Rail, (5) 2m Anchor Rail, (6) 1m Rail, (2) 2m Service Rail, Auto Header, Wall Brackets, Spacers, etc.
  
  
• Klondike Series 12 x 48 Longtom Clean-up Unit
  
  
• Shaw Backpack Core Drill Package
  
  
• Sandvik TH545I Underground Haul Truck - Under 2000 Hours, (2) Units Needed
  
  
• Flexifloat Barge - 80-Ton Deck Capacity, Suitable for Driven Pile Operations and Marine Construction, Preferably with Spud Systems or Anchoring Arrangements
  
  
• 700-750 GPM Fire Pump House - Diesel Driven Preferred, Refurbished is OK, Needed in Eastern Canada
  
  
• 3000/4000 Gallon Mobile Diesel Fueling Tank - Fueling Dispenser & Hose Preferred, Needed in Eastern Canada
  
  
• CAT 740 Articulated Haul Trucks
  
  
• Terex Mobile Light Tower - Model RL4
  
  
• 100 to 200 KW Indirect-Fired Electric Rotary Kiln - With Min. (2) Heating Zones that can be Controlled Independently
  
  
• 20-40 Ton Table Top Press
  
  
• 40-50ft Bridge - 30 Ton Capacity, 14ft Wide Max.
  
  
• 2000kW CAT C-175 Diesel Generator - 4160 Volt Output, Good Running Condition
  
  
• 800-1000kW Diesel Genset - New or Less than 100 Hours, Open or Enclosed, For Immediate Delivery
  
  
• 6ft Dia. x 4ft Hardinge Conical Ball Mill
  
  
• Surge Bin Feeder - 25-30 Yard Capacity
  
  
• Black Gold Magnetic Separator - (2) Units Needed
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• Knelson KC-MD3 Concentrator
  
  
• PMX 44in Gold Wheel
  
  
• Denver 5in x 6in Lab Jaw Crusher - Must Be Denver Unit
  
  
• Bico Ring and Puck Mill
  
  
• 150 Yard Per Hour Trommel
  
  
• Atlas Copco CS1000 Diamond Drill
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• Simba H1254 or Simba S7 - 2010+ Models, Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Sandvik DE130 or Atlas Copco Diamec 232 - Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• 120 CY/HR Concrete Batch Plant - Dry Batch with 3 to 4 Agg Bins - Mobile or Easily Erected
  
  
• 6in Dia. Poly Pipe - Used, 2000ft+ Needed, DR-11
  
  

Current Customer Requests - May 20, 2026

• Symons 5.5ft Cone Crusher - Standard Head
  
  
• 40-50ft Bridge - 30 Ton Capacity, 14ft Wide Max
  
  
• 2000kW CAT C-175 Diesel Generator - 4160 Volt Output, Good Running Condition
  
  
• 800-1000kW Diesel Genset - New or Less than 100 Hours, Open or Enclosed, For Immediate Delivery
  
  
• 6ft Dia. x 4ft Hardinge Conical Ball Mill
  
  
• Small Steam Turbine - CoGen Operation
  
  
• Surge Bin Feeder - 25-30 Yard Capacity
  
  
• Black Gold Magnetic Separator
  
  
• MSI Xtruder 255  Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• Sepro Falcon C400 Concentrator - Needed in Chile
  
  
• Knelson KC-MD3 Concentrator
  
  
• PMX 44in Gold Wheel
  
  
• Denver 5in x 6in Lab Jaw Crusher
  
  
• Bico Ring and Puck Mill
  
  
• 150 Yard Per Hour Trommel
  
  
• Atlas Copco CS1000 Diamond Core Drill
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Atlas Copco CS10 Diamond Core Drill - New or Used
  
  
• Simba H1254 or Simba S7 - 2010+ Models, Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Sandvik DE130 or Atlas Copco Diamec 232 - Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• 120 CY/HR Concrete Batch Plant – Dry Batch with 3 to 4 Agg Bins – Mobile or Easily Erected
  
  
• 50,000+ Liter Double-Walled Tank - Used or Reconditioned, Needed in SW Manitoba 
  
  
• Refurbished Frac Tanks - Suitable for Temp Crude Oil Storage, 400–450 BBL Per Unit, Needed in Callao Port, Peru  
  
  
• 6in Dia. Poly Pipe - Used, 2000ft+ Needed, DR-11
  
  

Current Customer Requests - May 13, 2026

• Surge Bin Feeder - 25-30 Yard Capacity
  
  
• Knelson KC-MD3 Concentrator
  
  
• MSI Xtruder 255 Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• Sepro Falcon C400 Concentrator - Needed in Chile
  
  
• PMX 44in Gold Wheel
  
  
• Bico Ring and Puck Mill
  
  
• Denver 5in x 6in Lab Jaw Crusher
  
  
• Black Gold Magnetic Separator
  
  
• 6in Dia. Poly Pipe - Used, 2000ft+ Needed, DR-11
  
  
• 150 Yard Per Hour Trommel
  
  
• Atlas Copco CS1000 Diamond Drill
  
  
• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Simba H1254 or Simba S7 - 2010+ Models, Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Sandvik DE130 or Atlas Copco Diamec 232 - Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• 120 CY/HR Concrete Batch Plant - Dry Batch with 3 to 4 Agg Bins - Mobile or Easily Erected
  
  
• 50,000+ Liter Double-Walled Tank - Used or Reconditioned, Needed in SW Manitoba 
  
  
• Refurbished Frac Tanks - Suitable for Temp Crude Oil Storage, 400–450 BBL Per Unit, Needed in Callao Port, Peru  
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  

Current Customer Requests - May 6, 2026

• Atlas Copco CS1000 Diamond Drill
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• Simba H1254 or Simba S7 - 2010+ Models, Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Sandvik DE130 or Atlas Copco Diamec 232 - Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• 1600kW Generator - Rated at 600 Volts, 3-Phase, With Enclosure
  
  
• Sepro Falcon C400 Concentrator - Needed in Chile
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• Knelson KC-MD3 Concentrator
  
  
• PMX 44in Gold Wheel
  
  
• Denver 5in x 6in Lab Jaw Crusher
  
  
• Bico Ring and Puck Mill
  
  
• 150 Yard Per Hour Trommel
  
  
• 120 CY/HR Concrete Batch Plant - Dry Batch with 3 to 4 Agg Bins - Mobile or Easily Erected
  
  
• 6in Dia. Poly Pipe - Used, 2000ft+ Needed, DR-11
  
  
• Refurbished Frac Tanks - Suitable for Temp Crude Oil Storage, 400-450 BBL Per Unit, Needed in Callao Port, Peru
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  

Current Customer Requests - April 29, 2026

• 150 Yard Per Hour Trommel
  
  
• Sepro Falcon C400 Concentrator - Needed in Chile
  
  
• Sepro Falcon UF 1000 Concentrator
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MSI Enhancer 755 Gold Concentrator - in Canada or USA
  
  
• PMX 44in Gold Wheel
  
  
• Bico Ring and Puck Mill
  
  
• Lab Roll Crusher - Denver Type
  
  
• Benchtop Water Deionizer - 100-150 Liters Per Hour, 240 Volt, (2) Units Needed
  
  
• Simba H1254 or Simba S7 - 2010+ Models, Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Sandvik DE130 or Atlas Copco Diamec 232 - Used or Refurbished, Ready for Sale or Short Lead-Time Delivery
  
  
• Multipower Hornet Drill - or Similar RAB/RC Drill Rig
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• 60MW Siemens SGT600 Generator - (4) 15MW Units or (3) 20MW Units - New, Ready to Ship, Zero-Hour Overhauled Units Considered
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• Eimco C60B2 Drive Unit - For Thickener
  
  
• Cummins QSK-78 Diesel Engine - Used, Complete, Good Condition, from Komatsu 980E-5 Truck
  
  

Current Customer Requests - April 22, 2026

• Calcite (Calcium Carbonate) Processing Plant - 5-10 TPH Capacity - Target Fineness: 100, 150, 200, 250, and 300 Mesh - Standards: Suitable for Feed-Grade Production (Clean/Non-Toxic History)
  
  
• 2000kW Diesel Generators - 480V, Low Hour, Tier II, Enclosed (Sound or Weatherproof), Base Tank
  
  
• Raymond 5R Mill - Refurbished, Capable of Consistent 300 Mesh Output
  
  
• Primary Crusher (Jaw or Cone) for Calcite Feed
  
  
• Extrac-Tec HPC-30 Trommel Concentrator
  
  
• Multipower Hornet Drill - or Similar RAB/RC Drill Rig
  
  
• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• Falcon UF 1000 Concentrator
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MBMM 5ft x 12ft Concentrating Table
  
  
• Gemeni-Type Concentrating Table
  
  
• PMX 44in Gold Wheel 
  
  
• Bico Ring and Puck Mill
  
  
• Lab Roll Crusher - Denver Type 
  
  
• Air Classifier & Bagger - New, 10 TPH Output
  
  
• High-Intensity Suspended Plate Magnet - New, Unused Surplus
  
  
• High-Intensity Magnetic Grid/Drawer - Neodymium, Min 10,000 Gauss, New, Unused Surplus
  
  
• 3-Drum Slusher - (2) Units Needed, 40HP/30kW, Preferably with 415V, 50Hz (Will Consider other Voltage)
  
  
• Portable Truck Scale System - For Remote Project Sites, Must be Quick and Easy Setup & Calibration, Suitable for Weighing Tandem-Axle Dump Trucks
  
  
• Joy LT270 Scooptram - Core Units - Qty: 4 Units
  
  
• Joy LT210 Scooptram - Core Units - Qty: 4 Units  
  
  
• Detroit Diesel "Series 60" 14-Liter Engine Cores
  
  
• 6in Dia. Poly Pipe - DR 11 Rating 
  
  
• 6in Dia. Poly Pipe - Used, For Conduit 
  
  
• Excavator Crusher Bucket - to Fit Volvo 355 Excavator
  
  

Current Customer Requests - April 15, 2026

• Atlas Copco CS10 Diamond Drill - New or Used
  
  
• Boart Longyear LF70 Diamond Core Drill
  
  
• Christensen CS14 Diamond Core Drill - 2017-2025 Model
  
  
• Multipower Hornet Drill - or Similar RAB/RC Drill Rig
  
  
• 10-15 TPH XRT Sorting Solution for Copper and Zinc Ore Processing - Similar to Steinert XSS T or Tomra COM Tertiary
  
  
• Falcon UF 1000 Concentrator
  
  
• Kelsey J1300 Centrifugal Mineral Jig
  
  
• Gold Machine - Model 10 and Model 100
  
  
• 500TPH Agglomerator - Used, Complete
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MBMM 5ft x 12ft Concentrating Table
  
  
• Gemeni-Type Concentrating Table
  
  
• Eriez Magnetic Wet Drum Separator - 12in or 15in Diameter Drum
  
  
• Black Gold Magnetic Separator
  
  
• Warman 10in x 8in AH Slurry Pump
  
  
• Eimco 12B Mucking Machine
  
  
• Small Underground Haul Trucks - (2) Units Needed
  
  
• Moxy-Type Articulating Rock Truck - Smaller Size, Older Unit Preferred
  
  
• 80 -120 Ton Excavator For East Coast of Australia - Sub 30k Frame Hours,  Mine Spec,  Work Ready
  
  
• Excavator Crusher Bucket - for Volvo 355 Excavator
  
  
• CAT 777 Haul Truck - Newer Model, for Rebuild
  
  
• CAT 992K Wheel Loader
  
  
• Portable Truck Scale System - For Remote Project Sites, Must be Quick and Easy Setup & Calibration, Suitable for Weighing Tandem-Axle Dump Trucks
  
  
• 6ft Fume Hoods - (2) Units Needed near Montreal, QC, Canada, Would Consider 4ft or 5ft
  
  
• Fume Hoods - (13) Units Needed - (7) x 8ft, (4) x 6ft & (2) x 4ft, Needed in Toronto, Ont.
  
  
• Horizontal High-Pressure Boiler - 300-400HP with a Min Capacity of 4,500 kg
  
  
• Canmet Approved Diesel Engine For Wagner ST6-C - Mercedes OM906.991LA (255HP or 275HP preferred) or Deutz BF6M1013CP (221 HP), New, Reman or Used Canmet Approved Engine (200-300HP)
  
  
• Steel Cord Belting - Between 55”-75” Width, Min Thickness 22mm with Top Cover of 10mm Minimum above Steel Cords - Good Used Condition
  
  
• Wooden Train Wagon - for Display and Conversion, Needed in Lima, Peru
  
  
• Machine Shop Capable of Pouring 15in Dia. Babbitt Replacement Bearings - Near Orofino, Idaho
  
  

Current Customer Requests - April 8, 2026

• Zinex A5 Track-Mount Diamond Core Drill
  
  
• Sandvik LH410 7-Yard Scooptram
  
  
• 500TPH Agglomerator - Used, Complete
  
  
• Gold Machine - Model 10 and Model 100
  
  
• 1000 Ton Per Day Gold Plant with Flotation and Leaching 
  
  
• 10-15 TPH XRT Sorting Solution for Copper and Zinc Ore Processing - Similar to Steinert XSS T or Tomra COM Tertiary
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MBMM 5ft x 12ft Concentrating Table
  
  
• Deister No. 6 Concentrating Table – Used
  
  
• Gemeni-Type Concentrating Table
  
  
• Black Gold Magnetic Separator
  
  
• Eimco 12B Mucking Machine
  
  
• 30 TPH DSM Screen
  
  
• 6ft Fume Hoods - (2) Units Needed near Montreal, QC, Canada, Would Consider 4ft or 5ft
  
  
• Fume Hoods - (13) Units Needed - (7) x 8ft, (4) x 6ft & (2) x 4ft, Needed in Toronto, Ont.
  
  
• Warman 10in x 8in AH Slurry Pump
  
  
• American Manufacturing AW1122BCD Piston Pump - or Similar, Needs to be Diesel Powered
  
  
• 12ft Wide x 50ft Long Bridge - Flat Bridge, No Sides Rails
  
  
• 12ft Wide x 30-40ft Long Bridge
  
  
• 8-Ton Electric Locomotive - 36in Gauge
  
  
• CAT G3606 OR G3608 Engines - up to (10) Units Needed, Used or New Surplus
  
  
• Hiex Teleblaster II Remote Firing Device - Functioning or Non-Functioning for Parts
  
  
• Machine Shop Capable of Pouring 15in Dia. Babbitt Replacement Bearings - Near Orofino, Idaho
  
  

Current Customer Requests - April 1, 2026

• 1000 TPD Gold Plant with Flotation and Leaching - 1000 Ton Per Day Throughput (Approx.)
  
  
• 1-5 TPD SXEW Plant - For Copper Oxides, Needed in Africa
  
  
• Zinex A5 Track-Mount Diamond Core Drill
  
  
• Atlas Copco COP 1532 Hydraulic Drill
  
  
• 3ft Gyrodisk Cone Crusher
  
  
• 10ft x 20ft Derocker - or Similar Size
  
  
• Sepro Falcon SB400 Concentrator - Preferably Located in Europe
  
  
• Gemeni-Type Concentrating Table
  
  
• MBMM 5ft x 12ft Concentrating Table
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• Deister No. 9 Concentrating Table - Used
  
  
• Highbanker Sluice
  
  
• 30 TPH DSM Screen
  
  
• Warman 10in x 8in AH Slurry Pump
  
  
• American Manufacturing AW1122BCD Piston Pump - or Similar
  
  
• Terex TA30 Articulated Rock Truck
  
  
• 12ft Wide x 50ft Long Bridge - Flat Bridge, No Sides Rails
  
  
• 12ft Wide x 30-40ft Long Bridge
  
  
• 8-Ton Electric Locomotive - 36in Gauge
  
  
• 60in - 84in Diameter Round Pipe - 0.5in Thick, 30ft Long (Will Take Longer)
  
  
• (2) Wheel Motor -  to fit a LIEBHERR T282C, Code: 90000840
  
  
• Machine Shop Capable of Pouring 15in Dia. Babbitt Replacement Bearings - Near Orofino, Idaho
  
  

Current Customer Requests - March 25, 2026

• 1000 TPD Gold Plant with Flotation and Leaching - 1000 Ton Per Day Throughput (Approx.)
  
  
• Symons 4.25ft Cone Crusher - Used
  
  
• Reverse Circulation Portable Drilling Rig - 80-100m Depth Capacity
  
  
• 5ft Dia. x 20ft Long Trommel - Self-Contained
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• Deister No. 9 Concentrating Table - Used
  
  
• MBMM 5ft x 12ft Concentrating Table
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• 1-5 TPD SXEW Plant - For Copper Oxides, Needed in Africa
  
  
• 2.5yd³ Scooptram - New or 2024+ Models, Equivalent to Sandvik LH203
  
  
• Caterpillar AD30 Underground Haul Truck - Used Condition, Needed in Germany
  
  
• Eimco 12B Muckers
  
  
• Dahlke 7in Floating Dredge
  
  
• 12ft Wide x 30-40ft Long Bridge
  
  
• 12ft Wide x 50ft Long Bridge - Flat Bridge, No Sides Rails
  
  
• Westfailia Centrifuge - RSA-150 or RSA-200 Model, Good Condition and Ready-to-Work
  
  
• Soap Mixing Unit - SLES Mixing & Dilution Unit, Good Condition and Ready-to-Work
  
  
• Cooker - Canola Extraction Process, 1500 TPD Capacity
  
  
• (2) 5,000 Gallon Carbon Filters - Used
  
  
• (4) 2,000 Gallon Carbon Filters - Used
  
  
• 2,500kVA Padmount Transformer - 23.9kV Delta Primary, 480/277V Secondary, Tamper-Resistant, With Switches and Fuses
  
  
• 12-15 Ton Battery Locomotive - With Lithium Battery and Lithium Battery Charger
  
  
• (2) 8-Ton Trolley-Type Mining Locomotives - Powered by a 250-275VDC Pantograph, Equipped with (2) Traction Motors (80-90HP), With a 30in Gauge, Good Condition
  
  
• Deutz BF4L2011 Diesel Engine - Overhauled, Needed in Mexico City
  
  
• Machine Shop Capable of Pouring 15in Dia. Babbitt Replacement Bearings - Near Orofino, Idaho
  
  
• Toggle Block - for a Telsmith 3042 Jaw Crusher
  
  
• 2000ft of 10in Dia. HDPE Pipe - DR17 
  
  

Current Customer Requests - March 18, 2026

• 1000 TPD Gold Plant with Flotation and Leaching - 1000 Ton Per Day Throughout (Approx.)
  
  
• 8ft Dia. x 4ft Long Hardinge Conical Mill
  
  
• Symons 4.25ft Cone Crusher - Used
  
  
• Symons 2ft Shorthead Cone Crusher
  
  
• Boart Longyear 38 Diamond Core Drill
  
  
• Versa KmA3S Diamond Core Drill
  
  
• Reverse Circulation Portable Drilling Rig - 80-100m Depth Capacity
  
  
• iCON i350 Concentrator
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• MBMM 5ft x 12ft Concentrating Table
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• Denver-Type Lab Roll Crusher
  
  
• MBMM 16in x 12in Hammer Mill
  
  
• Outokumpu OK 16 Flotation Cells - Used, Bank of Two Units
  
  
• Eimco 12B Muckers
  
  
• Worthington 4-FRBHX-182 Pumps - Size 4x6-18, or Direct Equivalent Flowserve 4-FRBH-182, Goulds 3175 or 3180 (4x6-18)
  
  
• Overhead Yard Crane - For Log Home Builder
  
  
• Rake Drive for 150ft Thickener - Reconditioned, Center Column Drive, 12MNm Required Torque (8.8 million ft-lb), 0.05 RPM Rake Speed, 480 Volt Electric with VFD, 8ft Dia. Central Torque Tube, Hydraulic Rake Lift System, Torque Monitoring/Overload Protection
  
  
• HDPE Pipe Fusion Machine - for 6in-12in Pipe
  
  
• Truck Box For Underground Haul Truck - CAT AD30
  
  
• Portable Restroom with Shower
  
  
• 2,000 Feet of Aluminum Main Line Irrigation Pipe - 6in or 8in, 125 PSI Minimum
  
  
• Truck Weigh Scale - Small, Single-Axle Considered
  
  

Current Customer Requests - March 11, 2026

• 8ft Dia. x 4ft Long Hardinge Conical Mill
  
  
• Symons 4.25ft Cone Crusher - Used 
  
  
• MBMM 16in x 12in Hammer Mill
  
  
• MSI 255 Xtruder Concentrating Table - New or Used
  
  
• Outokumpu OK 16 Flotation Cells - Used, Bank of Two Units
  
  
• Goldlands Sonic Sluice
  
  
• Klondike Series 12 x 48 Longtom
  
  
• Troxler 4141 Gyratory Compactor - or Similar Gyratory Compactor
  
  
• Eimco 12B Muckers
  
  
• Caterpillar R1700 Scooptram - (3) Units Needed
  
  
• CAT 140H Grader - Preferred with 2ZK Serial, Will Consider Others
  
  
• Sennebogen 835M Material Handler - 2022 & Newer Preferred
  
  
• Flygt 1320.181-2060029 Pump - 1320181-0704270
  
  
• HDPE Pipe Fusion Machine - For 6in-12in Pipe
  
  
• 30,000-40,000 Liter Horizontal Double-Wall Tank
  
  
• 2,000 Feet of Aluminum Main Line Irrigation Pipe -  6” or 8”, 125 PSI Minimum
  
  
• Truck Weigh Scale - Small, Single-Axle Considered 
  
  
• 10ft x 20ft Derocker - Good, Used Condition
  
  
• Denver-Type Lab Roll Crusher
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• Versa KmA3S Diamond Core Drill
  
  
• Flour Mill/Grinder - Smaller Size Unit
  
  
• Triple Pass Drum Dryer - Approx. 8ft x 30ft with Webb Burner
  
  

Current Customer Requests - March 4, 2026

• 16ft Dia. x 23.5ft EGL Ball Mills - 3500 kW (VSD), Each with a Feed Rate of 212.5 dmt/h, Complete with All Required Ancillary Equipment
  
  
• 7ft Dia. x 6ft Long Ball Mill - Electric Motor and Starter
  
  
• Versa KmA3S Diamond Core Drill
  
  
• Low Profile Scooptram - 4 Yard or 6 Yard Capacity, Max Height under 86in, Prefer Good Used, Refurbished or Rebuilt Unit
  
  
• Superior 42x100JC Conveyors - 3 Units Needed, 42in Wide x 100 Feet Long & Needs Hydraulics on the Flip
  
  
• Cemco 35 VSI Impact Crusher - Closed Table
  
  
• 10ft x 20ft Derocker - Good Used Condition
  
  
• Triple Pass Drum Dryer - Approx 8ft x 30ft with Webb Burner
  
  
• Flour Mill/Grinder - Smaller Size Unit
  
  
• CAT 789D Trucks - 3-4 Units, Must Have Less than 40,000 Frame Hours, Preferred Location is Australia, Offshore Options Considered
  
  
• Cat D11 KSN or D11T Dozers - 2 Units, Must Have Less than 15,000 Frame Hours, Preferred Location is Australia, Offshore Options Considered
  
  
• Silenced Jacklegs - 51” Legs & 39” Legs
  
  
• Denver-Type Lab Roll Crusher
  
  
• Narrow Vein Jumbo Drill - Epiroc T1 Boomer, Sandvik DD210 or Similar
  
  
• Narrow Vein Bolter - Sandvik DS2711 or Similar
  
  
• 80-100 Liter Cross-Flow Blender - 3-3.5ft³ Capacity
  
  
• Silos - 30 Ton & 50 Ton - 4m Diameter x 7m High, For Polymer Resin Storage
  
  
• CAT 950B Wheel Loader
  
  
• 150 TPH Screen Wash Plant
  
  
• Cedarapids 42 x 48 Jaw Crusher
  
  
• Cone Crusher - Cedarapids 45II,MVP280, or a KPI K200 Cone
  
  
• iCON i150 Concentrator - Needed in Côte d'Ivoire
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• 24in Sweco Circular Screen
  
  
• Atomic Absorption Spectrophotometer - Only GBC Scientific, Buck Scientific 210/211 or Any Varian Flame-Based AAS Machine
  
  
• Ceramic Grinding Media - 3in-4in, (2) Tons Needed
  
  
• JCI 50M Scooptram
  
  
• CAT 613C Motor Scraper
  
  

Current Customer Requests - February 25, 2026

• Dorr Oliver Rotary Vacuum Drum Filter - 13.5ft Dia. x 20ft, Stainless Steel Preferred
  
  
• Narrow Vein Jumbo Drill - Epiroc T1 Boomer, Sandvik DD210 or Similar
  
  
• Narrow Vein Bolter - Sandvik DS2711 or Similar
  
  
• 80-100 Liter Cross-Flow Blender - 3-3.5ft³ Capacity
  
  
• Silos - 30 Ton & 50 Ton - 4m Diameter x 7m High, For Polymer Resin Storage
  
  
• Vcella 30 Front Load Kiln
  
  
• Remanufactured Exciter Assembly for a 6ft x 16ft Tabor Vibrating Screen - Preferably Tabor Brand; Open to Conn-Weld or Allis-Chalmers. Multiple Units
  
  
• CAT 950B Wheel Loader
  
  
• 150 TPH Screen Wash Plant
  
  
• Cedarapids 42 x 48 Jaw Crusher
  
  
• Cone Crusher - Cedarapids 45II,MVP280, or a KPI K200 Cone
  
  
• iCON i150 Concentrator - Needed in Côte d'Ivoire
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• Lab-Size Gravity Table - Used
  
  
• Small Rod Mill
  
  
• Warman Cyclosizer - Multiple Units Needed, Would Consider Other Make/Models
  
  
• 24in Sweco Circular Screen
  
  
• Atomic Absorption Spectrophotometer - Only GBC Scientific, Buck Scientific 210/211 or Any Varian Flame-Based AAS Machine
  
  
• Ceramic Grinding Media - 3in-4in, (2) Tons Needed
  
  
• RDO Portable Wood-Rock Separator
  
  
• Excavator/Backhoe Drifter Drill Attachment
  
  
• JCI 50M Scooptram
  
  
• CAT 613C Motor Scraper
  
  
• 10-Ton Overhead Crane - 85ft Span
  
  
• Large SpaceKap - For Chevy 3500
  
  
• Plastic-Capped Camel Back Sawmill Chain
  
  
• 115 Lbs. Relay Rail - 1232 Linear Feet, Used, With Splice Bars & Bolts and 2,464 #62 Hold-Down Clips
  
  
• Drum for Clark 666B Ranger Skidder - 1974-1976 Model Range
  
  

Current Customer Requests - February 18, 2026

• 150 TPH Screen Wash Plant
  
  
• Cedarapids 42 x 48 Jaw Crusher
  
  
• Cone Crusher - Cedarapids 45II,MVP280, or a KPI K200 Cone
  
  
• iCON i150 Concentrator - Needed in Côte d'Ivoire
  
  
• Deister No. 6 Concentrating Table - Used
  
  
• Lab-Size Gravity Table - Used
  
  
• Small Rod Mill
  
  
• Underground Refuge Chamber
  
  
• Warman Cyclosizer - Multiple Units Needed, Would Consider Other Make/Models
  
  
• 24in Sweco Circular Screen
  
  
• Atomic Absorption Spectrophotometer - Only GBC Scientific, Buck Scientific 210/211 or Any Varian Flame-Based AAS Machine
  
  
• Ceramic Grinding Media - 3in-4in, (2) Tons Needed
  
  
• RDO Portable Wood-Rock Separator
  
  
• Excavator/Backhoe Drifter Drill Attachment
  
  
• JCI 50M Scooptram
  
  
• CAT 966H Wheel Loader - 2010 Models and Up
  
  
• CAT D9T Dozer
  
  
• CAT 613C Motor Scraper
  
  
• 10-Ton Overhead Crane - 85ft Span
  
  
• Large SpaceKap - For Chevrolet 3500 Truck
  
  
• Plastic-Capped Camel Back Sawmill Chain
  
  
• 115 Lbs. Relay Rail - 1,232 Linear Feet, Used, With Splice Bars & Bolts and 2,464 #62 Hold-Down Clips
  
  
• CAT R1700 Bucket - For Scooptram
  
  
• Remanufactured Exciter Assembly for a 6ft x 16ft Tabor Vibrating Screen - Preferably Tabor Brand; Open to Conn-Weld or Allis-Chalmers. Multiple Units
  
  
• Drum for Clark 666B Ranger Skidder - 1974-1976 Model Range
  
  

Current Customer Requests - February 11, 2026

• 500 TPH Gold Wash Plant - With Sluice Boxes
  
  
• 3,000-6,000 TPD Gold Process Plant with Flotation
  
  
• 5065 MK II Gyratory Crusher
  
  
• 4265 MK II Gyratory Crusher
  
  
• 7,500HP SAG Mill - 5,516kW
  
  
• 3,000HP Ball Mill - 2,206kW
  
  
• 100m³ Flotation Cells - 3,353ft³
  
  
• Plate Filter Presses - For Tailings
  
  
• 3000 Amp, 480 VAC Service - With a 2000 Amp and 800 Amp 3-Pole Breakers
  
  
• CAT Wheel Loader (924H / 926H / 926M) - Sub 5,000 Hours Preferred, GP Bucket & Forks, Needed in East Coast Australia (QLD / NSW / VIC) 
  
  
• CAT CS76 Vibratory Roller - Sub 8,000 Hours Preferred, Needed in East Coast Australia (QLD / NSW / VIC) 
  
  
• 10in x 36in Telsmith Jaw Crusher - Bare Jaw, 60’s Vintage
  
  
• 10in x 16in Jaw Crusher
  
  
• Denver-Type Lab Roll Crusher
  
  
• MBMM 16in x 12in Hammer Mill - 24in x 16in Hammer Mill Considered
  
  
• iCON i150 Concentrator
  
  
• Knelson KC-MD3 Concentrator - Multiple Units Required
  
  
• Sweco 60in Dia. 2-Deck Circular Screen - (2) Units Needed, 575 Volt Preferred, Would Consider 72in Models
  
  
• Ferris Wheel Classifier - 2 TPH
  
  
• Eimco 12B Muckers - Used, in Any Condition, (5) Units Needed
  
  
• 30,000 Liter Double-Wall Fuel Storage Tanks - (3) Units Needed
  
  
• EZ Car Crusher - or Similar Hydraulic Car Crusher that is Diesel-Engine Powered 
  
  

Current Customer Requests - February 4, 2026

• Macon SD-600 Screen Plant
  
  
• Sepro Falcon SB400 Concentrator
  
  
• iCON i150 Concentrator
  
  
• MSI Xtruder 255 Concentrating Table
  
  
• Sweco 60in Dia. 2-Deck Circular Screen - (2) Units Needed, 575 Volt Preferred, Would Consider 72in Models
  
  
• Hardinge 8ft x 22in Ball Mill
  
  
• 10in x 16in Jaw Crusher
  
  
• MBMM 16in x 12in Hammer Mill - 24in x 16in Hammer Mill Considered
  
  
• Denver-Type Lab Roll Crusher
  
  
• 12in Rock Saw
  
  
• 5-10 TPH Up-Current Classifier
  
  
• Ferris Wheel Classifier - 2 TPH
  
  
• Eimco 12B Muckers - Used, in Any Condition, (5) Units Needed
  
  
• Kubota R520S Wheel Loader
  
  
• CAT 966A - Any Condition - For Collection
  
  
• Water Tenders with Cannon - 12m³, 3500-5000 Gallon, (2) Units Needed
  
  
• Gould Series 3656S Centrifugal Pump - Model 1 ½ X 2 – 6, with 5.625” Impeller, 3HP, 3600 RPM Motor, Single Phase
  
  
• E-Z Car Crusher - or Similar Hydraulic Car Crusher that is Diesel-Engine Powered 
  
  
• Direct Fired Rotary Dryer for Drying Pelletized Fly Ash - Approx. 1.5m Diameter x 8-10m Length, Carbon Steel Shell is Acceptable (Process Temp 150°C)
  
  
• Cummins QSV81-G Engine - Complete Engine, 1425kW, 1500 RPM
  
  
• Propane Forklift - 11,000 to 20,000 lbs. Capacity, Cushion Tire, Older Model Preferred/No Computer
  
  
• Machine Shop Capable of Pouring 15in Dia. Babbitt Replacement Bearings - Near Orofino, Idaho
  
  

Current Customer Requests - January 28, 2026

• Sepro Falcon SB400 Concentrator
  
  
• iCON i150 Concentrator
  
  
• MSI Xtruder 255 Concentrating Table
  
  
• Macon SD-600 Screen Plant
  
  
• Sandvik DE710 Diamond Core Drill
  
  
• Eljay 45 Roller Cone Crusher
  
  
• Hardinge 8ft x 22in Ball Mill
  
  
• MBMM 16in x 12in Hammer Mill - 24in x 16in Hammer Mill Considered
  
  
• 10in x 16in Jaw Crusher
  
  
• Denver-Type Lab Roll Crusher
  
  
• 5-10 TPH Up-Current Classifier
  
  
• 6ft x 20ft Cedarapids 3-Deck Screen - Model 6203, Complete or Parts Unit - 6ft x 16ft May Be Considered
  
  
• Sweco 60in Dia. 2-Deck Circular Screen - (2) Units Needed, 575 Volt Preferred, Would Consider 72in Models
  
  
• Eimco 12B Muckers - Used, in Any Condition, (5) Units Needed
  
  
• Sandvik TH545i Underground Truck - New or Slightly Used
  
  
• Kubota R520S Wheel Loader
  
  
• Putzmeister SPM-4207 Shotcrete Sprayer
  
  
• Water Tenders with Cannon - 12m³, 3500-5000 Gallon, (2) Units Needed
  
  
• Radial Stacking Conveyor - 125ft-150ft, Feed Rate of 100-120 tonne/hr, Electrical: 575 Volt, 3-Ph, 60Hz Power
  
  
• Horizontal Transfer Conveyor - 60-80ft, 100-120 tonne/hr, Electrical: 575 Volt, 3-Ph, 60Hz
  
  
• FMC W11-435 Bean High-Pressure Piston Pump - Complete with Diesel Drive and Transmission
  
  

Current Customer Requests - January 21, 2026

• 10in x 16in Jaw Crusher
  
  
• Denver-Type Lab Roll Crusher
  
  
• ElJay 45 Roller Cone Crusher
  
  
• Symons 2ft Shorthead Cone Crusher - Or Similar
  
  
• 6ft x 20ft Cedarapids 3-Deck Screen - Model 6203, Complete or Parts Unit - 6ft x 16ft May Be Considered
  
  
• 0.5yd-0.7yd Narrow-Vein Scooptram - Max 0.88m Wide