Caterpillar 14M Motor Grader ID: 196879

• Engine:
  • Make Caterpillar.
  • Model C11 ACERT VHP.
  • Net Power Gear 1-2 259 hp/193 kw.
  • Net Power Gear 3-4 274 hp/204 kw.
  • Power Measured @: 1800 rpm.
  • Net Power Gear 5-6: 274 hp/204 kw.
  • Number of Cylinders: 6.
  • Net Power Gears 7-8: 274 hp/204.3 kw.
  • Max Power: 274 hp/204.3 kw.
  • Displacement: 677 cu in/11.1 L.
• Operational:
  • Front Axle Std Operation Weight: 12611 lb/5720 kg.
  • Rear Axle Std Operation Weight: 34522 lb/15659 kg.
  • Total Std Operation Weight: 47133 lb/21379 kg.
  • Front Axle Max Operation Weight: 21912 lb/9939 kg.
  • Rear Axle Max Operation Weight: 44086 lb/19997 kg.
  • Total Max Operation Weight: 65998 lb 29936 kg.
  • Fuel Capacity: 130 gal/492 L.
  • Cooling System Fluid Capacity: 12.3 gal/46.5 L.
  • Hydrauilc System Fluid Capacity: 15.9 gal/60 L.
  • Transmission Fluid Capacity: 23.5 gal/89 L.
  • Circle Gearbox Fluid Capacity: 1.6 gal/6 L.
  • Tandem Case Fluid Capacity (each): 25.5 gal/96.5 L.
• Transmission:
  • Type: direct drive, power shift, countershaft.
  • Number of Forward Gears: 8.
  • Number of Reverse Gears: 6.
  • Max Forward Speed: 31 mph/49.8 km/h.
  • Max Reverse Speed: 24.5 mph/39.4 km/h.
• Steering:
  • Articulation L/R: 20 degrees.
  • Turning Radius: 25.9 ft in/7.9 m.
• Front Axle:
  • Wheel Lean: 17.1 degrees.
  • Oscillation: Total 32 degrees.
• Hydraulic System:
  • Pump Type: variable displacement.
  • Pump Flow: 74 gal/min;280 L/min.
  • Relief Valve Pressure: 3500 psi/24150 kPa.
• Moldboard:
  • Moldboard Width: 14 ft in/4267 mm.
  • Moldboard Height: 27 in/688 mm.
  • Moldboard Thickness: 1 in/25 mm.
  • Max Depth of Cut: 17.3 in/438 mm.
  • Left Side Shift: 29.1 in/740 mm.
  • Right Side Shift: 31.1 in/790 mm.
  • Blade Pull at Max Weight: 39678 lb/17997 kg.
  • Blade Down Pressure: 38666.9 lb/17539 kg.
• Circle:
  • Diameter: 71.8 in/1822 mm.
  • Shift Left: 25.5 in/650 mm.
  • Shift Right: 20.5 in/520 mm.
  • Max Reach Outside Tires: Left 85.4 in/2169 mm.
  • Max Reach Outside Tires: Right 89.7 in/2279 mm.
  • Max Lift Above Ground: 16.5 in/419 mm.
  • Front Blade Tip Angle: 40 degrees.
  • Reart Blade Tip Angle: 5 degrees.
• Dimensions:
  • Height to Top of Cab: 11.6 ft in/3535 mm.
  • Overall Length: 30.9 ft in/9412 mm.
  • Width Over Tires: 9.2 ft in/2791 mm.
  • Wheelbase: 21.5 ft in/6559 mm.
  • Blade Base: 9.3 ft in/2842 mm.
  • Tandem Axle Wheelbase: 5.4 ft in/1656 mm.
  • Rear Ground Clearance: 1.3 ft in/383 mm.
• 7 shank ripper blade.
• 4 shanks fitted.
• Full ROPS cab.
• Hours: 9700.

Location: United Kingdom

View more Graders

Vibro Hammer PTC 120HD ID: 206510

• Year of Manufacture: 2009.
• Hours: 4400 approx.
• Included:
  • Power pack: PP800C.
  • Sheet pile clamp.
  • Tube clamp with T bar.
  • Set of hose.
• SPECIFICATIONS AT A GLANCE:
  Width: 1.505 m.
  Length: 2.300 m.
  Eccentric Moment: 120 m.kg.
  Max Centrifugal Force: 2550kN.
  
  
• Contact us for more information.

View more Crane Attachments