Wanted EquipmentSell Your Equipment Financing Now Available
Quote Request
Please provide us with as much detail as possible and we will get back to you.
150 YPH Trommel Wash Plant ID: 695057
Complete with:
- Rotary Trommel with Grizzly & Belt Feeder
- Drum: 7 ft. Dia. x 28 ft. Long with
- Full Length Spray Wash Bar Inside Drum
- Drum Comes with
- 2 in. Dia. Torch Cut Holes for 20 in. Long Section of Drum
- 7 ft. Long Sections pf 1 in. x 6 in. Long Torch Cut Slots in the Drum
- Trommel Drum Drive Consists of
- Electric Motor Driving a Gearbox Chain Driving Axles with Tires Rotating the Drum
- Motor is Driving a Hydraulic Pump that Drives the Grizzly Feeder
- Belt Feeder Comes with
- Inverted Rail Grizzly with 10 in. Spacing
- 30 in. Wide x 11 ft. Long Flat Belt Conveyor Discharging into the Rotary Trommel
- Conveyor Comes with Adjustable Hydraulic Drive Powered from the Trommel Motor
- Feeder is 9 ft. Wide x 12 ft. Long x 4 ft. Deep
- 2 Hydraulic Leveling Jacks on the Sides of the Feeder
- Includes Some Electrical Pieces
- 1 - 20 Amp Full Voltage Starter
- 1 - 30 Amp Full Voltage Starter
- 3 - 30 Amp Fuseable Disconnect
- Overall Dimensions: 11 ft. Wide x 43 ft. Long x 12 ft. 3 in. High
- Weight: 35,000 lbs.
- Drum: 7 ft. Dia. x 28 ft. Long with
- Included in Plant
- 1 - Pulsating Sluice
- 5 ft. Wide x 179 in. Long x 51 in. High
- Powered by
- Baldor 1 HP Motor
- 208-230/460 Volt
- 1140 RPM
- Through Radicon R/A Reducer to Another Reducer Chain Driving the Sluice
- Comes with Wash Bars
- 1 - Pulsating Sluice
- 22 in. Wide x 10 ft. Long x 20 in. High
- Powered by
- Baldor 2 HP Motor
- 208-230/460 Volt
- 1750 RPM
- Direct Driving Radicon R/A Reducer Chain Driving the Sluice
- 1 - 30 in. Wide x 49 ft. 6 in. Long Truss Frame Conveyor
- Head Pulley: 10 in. Dia. x 32 in. Face, Rubber Lagged
- Tail Pulley: 16 in. Dia. x 32 in. Face, Winged
- Belting: 2-Ply, 1/2 in. Thick
- Frame: 5 in. x 3 in. Hass & 4 in. x 3 in. HSS - 28 in. High
- 6 in. Dia. Cans, 35° Troughing Idlers
- 2 - 6 in. Dia. Rubber Return Idlers
- 10 HP US Electrical Motor
- 230/460 Volt
- 1750 RPM
- 1 - Spare Dryer Drum
- 7 ft. Dia.
- 35 ft. Long
- 7/8 in. Thick
- 8 in. Flange on Each End
- Bare Unit
- 1 - CAT Generator
- D 330 Series Diesel Engine
- 75 kW, 93.8 kVA Kato Gen End
- 3 PH, 208-240/416-480 Volt
- 1 PH, 50 kW, 62.5 kVA, 120/240 Volt
- 200 Amp Main Switch
- 3 - Starters, 220 Volt Plugs Ins
- 1 - 8 ft. Wide x 16 ft. Long Sluice
- Discharge End Tapers to 5 ft. Wide with
- Expanded Mesh Sections & Riffle Section
- Discharge End Tapers to 5 ft. Wide with
- 1 - Pulsating Sluice
- Location: British Columbia, Canada
View more Trommels