Nordberg Mine Hoist ID: 219635

• Manual and semi automatic control.
• Westinghouse 250HP electric motor.
  • 500 volt,
  • 300/600RPM
• Nordberg drum assembly/Falk gear box reducer.
• Turn style wheel included Frontier-Kempler Constructors.
• Siemens controls.
• Square D Electrics Slope.
• Angle of shaft.
  • 5 degrees
  • 2,300 feet of total travel
• Shaft/1,800 ft.
• Outside portal/500 ft.
• Rated heavy, anticipated load 60 tons
• Cable is 1 ¾ in. diameter
• Drum width is 58 in.
• Drum diameter is 9 ft. 8 in.
• Drum shaft tapered at end for bearing mount.
• Bull gear:
  • 11 in. dia.
  • 193 teeth
• Pinion: 29 teeth
• 66:1 gear ratio

 View more Mine Hoists

Square D 25 kVA Transformer ID: 384693

• kVA: 25
• Single Phase
• Primary Volt: 240/480
• Secondary Volt: 120/240
• 60 Hz
• Cat # C25S3H
• Dimensions: 22 in. Wide x 17 in. Deep x 24 in. High
• Weight: 245 lbs
• Location: British Columbia, Canada

View more Transformers

Met Chem 150ft³ Filter Press ID: 1480144

Met Chem 150ft³ Filter Press 

• Make: Met Chem
• Model/Size: 150 Cu. Ft. (150ft³)
• Type: Filter Press
• Style: Plate Filter
• Condition: Used Condition
• Plate Size: 1500mm
• Automatic Plate Shifter
• Drive: Crown Triton Electric Motor
  • Power Output: 10HP
  • Voltage: 230/460 Volt (Usable at 208V and 380 Volt)
  • Current: 25.6/12.8 Amps
  • Frequency: 60Hz (Usable at 50Hz)
  • Phase: 3-Phase
• Hydraulics: KTI Hydraulics
  • Pressure Rating: 5,000 PSI
• With Control Panel
  
  
• Location: Western USA

View More Filter Presses