John Deere 644J WH Wheel Loader ID: 1431807

John Deere 644J Wheel Loader

• Make: John Deere
• Model: 644J WH 
• Year: 2008
• Hours: 6,031.4 Hours
• Condition: Used Condition, Ready to Work
• Capacity: 3yd³ Bucket
• Equipped with 3rd Valve 
• Comes with Spare Bucket (3-Yard) and Forks (60in)
• Snow Plow Attachment Available for Additional Cost 
  
  
• General Model Specifications:
  • Engine: John Deere POWERTECH 6018H (Meets EPA and CARB Emission Non-Road Regulations)
    • Displacement: 496 cu. in. (8.1 L)
    • Rated Power: 185HP (138 kW) SAE Net @ 2,200 RPM
    • Peak Torque: 765 lb.-ft. (1040 Nm) @ 1,300 RPM
  • Transmission: Countershaft-Type Powershift
    • Torque Converter: Single-Stage, Single Phase
    • Shift Control: Electronically Modulated, Adaptive, Load and Speed Dependent
    • Shift Modes: Auto/Manual, Auto to 1st or 2nd, Kick Down or Kick Up/Down, Three Clutch Cutoff Settings Adjustable on Switch Pad
    • Top Speed:
      • Forward: 14.7 MPH (23.6 km/h)
      • Reverse: 15.5 MPH (24.9 km/h)
  • Axles/Brakes:
    • Final Drives: Heavy-Duty Inboard Planetary
    • Differentials: Hydraulic Locking Front, Conventional Rear 
    • Rear Axle Oscillation: 18° 
    • Service Brakes: Hydraulically Actuated, Inboard, Carrier Mounted, Pressure Oil-Cooled, Self-Adjusting, Multi-Disc
    • Parking Brake: Automatic Spring Applied, Hydraulically Released, Oil-Cooled, Multi-Disc
  • Hydraulic System/Steering:
    • Pump (Loader and Steering): Variable-Displacement, Axial-Piston Pump; Closed-Center, Pressure-Compensating System
    • Maximum Flow @ 2,200 RPM: 68 GPM (257 L/min) @ 1,000 PSI (6895 kPa)
    • Hydraulic Cycle Times:
      • Raise: 6.2 Seconds
      • Dump: 1.4 Seconds
      • Lower: 3.0 Seconds (Float Down)
      • Total: 10.6 Seconds
    • Turning Radius: 18ft. (5,500mm) (Measured to Centerline of Outside Tire)
      
      
• Location: Eastern Canada

View More Wheel Loaders