Wanted EquipmentSell Your Equipment Financing Now Available
New Offer
Please provide us with as much detail as possible and we will get back to you.
300TPH Portable Counterflow Drum-Mix Plant ID: 1423729
300TPH Portable Counterflow Drum-Mix Plant
- Make: CMI Roadbuilding Inc.
- Model: Magnum 300
- Type: Portable Counterflow Drum-Mix
- Year: 2021
- Hours: Approx. 500 Hours
- Condition: Used, Reported in Good Condition
- Output Capacity: 300TPH
- Main Units: 8
- Portable Aggregate Feed Unit:
- Hoppers:
- Number of Compartments: 5
- Thickness: 0.25in
- Capacity, Struck: 25 Ton
- Capacity, Heaped: 32 Ton
- Loading Width: 14ft
- Vibrators:
- Quantity: 2
- Power Output: 0.75HP
- Fitted to Bins 2 & 3
- Removable Guards
- Belt Feeders:
- Feeders: 5, Variable Speed
- Capacity: 300TPH Each
- Size: 30in Wide x 10ft 2in Centers
- Belt: 30in Wide
- Drive: 5HP, with AC Variable Frequency Inverter
- Gathering Conveyor:
- Belt: 36in Wide
- Drive: 15HP
- Belt Scraper
- Hopper Dividers:
- Quantity: 4
- Height: 2ft
- Foldable for Transport
- Bulkhead:
- Ramp Bulkhead: 8ft, Steel
- Ramp Wings
- Chassis: Welded Rolled Steel Construction
- Running Gear: Triple Rear Axle, Air Ride Suspension
- Hoppers:
- Portable Weigh Feed Conveyor & Scalping Screen:
- Scalping Screen:
- Size: 4ft Wide x 10ft Long
- Deck: Single
- Screen Mesh: 2in Woven Wire Mesh
- Drive: 5HP
- Hopper: Mounted Below Screen
- Weigh Feed Conveyor:
- Belt: 30in Wide
- Single Weight Idler
- Wind Covers
- Drive: 7.5HP
- Quantity: 2
- Belt Scraper
- Receiving Hopper
- Hydraulic Erect System
- For Conveyor
- Chassis: Welded Rolled Steel Construction
- Running Gear: Single Rear Axle, Air Ride Suspension
- Scalping Screen:
- Portable Magnum 300 Counterflow Drum-Mix & Burner:
- Slinger Conveyor:
- Belt: 24in Wide, Heat Resistant
- Drive: 5HP
- Belt Scraper & Shield
- Counterflow Drum-Mix:
- 2 Zone: Drying/Mixing
- Diameter: 7ft 4in Dia.
- Length: 44ft
- Drives: 30HP
- Quantity: 4
- Drum-Mix Thermocouple
- Infrared Sensor
- Fines Inject Auger:
- Drive: 5HP
- AC Injection: Fixed 3in AC Line
- Burner: Megastar MS-100
- Capacity: 100 MMbtu/hr
- Turbo Blower: 100HP
- Tertiary Blower: 15HP
- Cold Air Bleed Door
- Hydraulic Erect System
- Heavy Duty Hydraulic Cylinders
- Quantity: 4
- Heavy Duty Hydraulic Cylinders
- Hydraulic Power Unit
- Chassis: Welded Rolled Steel Construction
- Chassis Support Bases
- Running Gear: Triple Rear Axle, Air Ride Suspension
- Slinger Conveyor:
- Portable RA418 Roto-Aire Baghouse:
- Primary Dust: Inertial Dust Collector
- Discharge Chute
- Primary Return Auger:
- Size: 14in Diameter
- Drive: 15HP
- Support Stand
- Secondary Dust
- Capacity: 65,000ACFM
- Second Stage: Roto-Aire Bag Filter
- Type: Reverse Air Cleaning
- Filter Medium: Aramid 14oz/yd³ 894 Bags
- Filter Area: 13,684ft³
- Max Operating Temperature: 375°F
- Filter Cabinet:
- Construction: 3/16in Steel Plate
- Cleaning:
- Mechanism: Roto Step Reverse Induced Air Mechanisms
- Drive: 0.75HP
- Quantity: 4
- Mechanism: Roto Step Reverse Induced Air Mechanisms
- Trough Hopper:
- Construction: 3/16in Steel Plate
- Hopper Augers:
- Size: 16in Diameter
- Drive: 7.5HP
- Quantity: 2
- Cross Auger:
- Size: 12in Diameter
- Drive: 5HP
- Fines Cross Auger:
- Size: 9in Diameter
- Drive: 5HP with AC Variable Frequency Inverter
- Reclaimed Dust Auger:
- Shaft Mounted Gear Motor Drive: 10HP
- Dust Conditioner:
- Feed: Chute from Reclaimed Dust Auger
- Conditioner:
- Capacity: 25tonnes/hr
- Geared Motor Drive: 20HP
- Rotor: Single Shaft with Feed Screw Flight and Mixing Paddles
- Water Sprayers
- Discharge Height: 10ft
- Water Tank and Pump:
- Tank Capacity: 500gal
- Centrifugal Pump:
- Drive: 2HP
- Pipework
- Support Structure:
- Construction: Steel
- Vehicle Access: 11ft 6in Wide Clearence
- Fan Unit
- Type: Backward Inclined Centrifugal
- Drive: 100HP
- Quantity: 2
- Exhaust Stack: 20ft Tall
- Ducting
- Air Volume Control
- Bag Protection
- Slam Damper
- Hydraulic Leveling:
- Hydraulic Cylinders
- Quantity: 4
- Hydraulic Cylinders
- Chassis and Running Gear:
- Chassis: Welded Rolled Steel Construction
- Running Gear: Triple Rear Axle, Air Ride Suspension
- First and Second Fines Return Augers
- Auger Size: 14in Diameter
- Drive: 15HP
- Support Stands
- Primary Dust: Inertial Dust Collector
- Portable AC Storage System:
- Horizontal Thermal Oil Heated Tank:
- Capacity: 35,000gal, Split 25,000gal/10,000gal
- Diameter: 10ft 6in Diameter
- Fill Inlet: 3in Diameter
- Supply Outlet: 3in Diameter
- Return Inlet: 3in Diameter
- Drain Outlet: 4in Diameter
- Vent/Overflow: 4in Diameter
- Heating Tubes: 2in Diameter
- Temperature Control
- Inspect Hatches: 24in
- Quantity: 2
- Insulation and Cladding
- Asphalt Proportioning:
- Variable Speed Pump: 3in Viking Jacketed Pump with VFD
- Pump Capacity: 90GPM
- Drive: 15HP
- AC Supply System:
- Unload Pump: 3in Positive Displacement
- Capacity: 200GPM
- Drive: 15HP
- Valves: 3in Three-Way Valves
- Quantity: 2
- Pipework and Valves
- Heat Exchange Unit:
- Heat Exchanger: 1,840,050 Btu/hr (464,000 Kcal/hr)
- Burner: Fully Automatic Gas Fuel Burner
- Drive: 1.5HP
- Circulation Pump: Centrifugal
- Capacity: 175GPM
- Drive: 7.5HP
- Expansion Tank: 150gal
- Controls
- Chassis and Running Gear:
- Chassis: Welded Rolled Steel Construction
- Running Gear: Triple Rear Axle, Air Ride Suspension
- Horizontal Thermal Oil Heated Tank:
- Portable 95 Ton Self-Erect Mixed Material Storage:
- Drag Slat Conveyor:
- Size: 36in Wide x 36in Deep x 45ft Centers
- Capacity: 450TPH
- Drive: 60HP
- Mixed Material Batcher
- Mixed Material Storage Silo:
- Capacity: 95 Tons @120lbs/ft³
- Load Cells: 4
- Hydraulic Erect System:
- Heavy Duty Hydraulic Cylinders
- Quantity: 4
- Heavy Duty Hydraulic Cylinders
- Compressor & Pneumatics:
- Compressor: 15HP with 120gal receiver
- Chassis and Running Gear:
- Chassis: Welded Rolled Steel Construction
- Running Gear: Detachable Triple Rear Axle
- Drag Slat Conveyor:
- Portable PRB-120 RAP Feed System and Scalping Screen:
- Hopper: Single Compartment
- Capacity, Heaped: 20 Ton
- Loading Width: 14ft
- Hopper Grid
- Vibrator: 0.75HP
- RAP Inclined Belt Feeder:
- Capacity: 300TPH
- Size: 30in Wide x 10ft 2in Centers
- Belt: 30in Wide
- Drive: 5HP with Variable Frequency Inverter
- Scalping Screen:
- Size: 3ft Wide x 6ft Long
- Deck: Single
- Screen Mesh: 2in Woven Wire Mesh
- Drive: 5HP
- RAP Weight Feed Conveyor:
- Belt: 24in Wide
- Single Weight Idler
- Wind Covers
- Drive: 7.5HP
- Belt Scraper
- Receiving Hopper
- Hydraulic Erect System:
- For Conveyor
- Chassis and Running Gear:
- Chassis: Welded Rolled Steel Construction
- Running Gear: Single Rear Axle, Air Ride Suspension
- Hopper: Single Compartment
- Portable Split-Level Control House/MCC:
- Control House (High Level)/MCC:
- Size: 28ft Long x 10ft Wide
- Base Frame: Rolled Steel
- Motor Controls:
- Motor Panel
- Contactors
- Standards: UL and CSA Approved
- Night Generator Change Over Isolator Switch
- Impulse III Control & Management System
- JWS Loadout System
- Chassis and Running Gear:
- Chassis: Welded Rolled Steel Construction
- Running Gear: Single Rear Axle, Air Ride Suspension
- Control House (High Level)/MCC:
- Voltage: 600 Volts
- Frequency: 60Hz
- Phase: 3-Phase
- Location: Eastern Canada
View More Asphalt Plants