2023 Multipower L.A.D. Geotechnical Drill ID: 1592552

2023 Multipower L.A.D. Geotechnical Drill 

• Make: Multi-Power Products
• Model: L.A.D. 
• Type: Track-Mounted Limited-Access Geotechnical and Environmental Drill
• Year: 2023
• Hours: 227 Hours on Meter
• Condition: Used Condition
• Applications: 
  • Drilling Auger (Hollow and Solid Stem)
  • RAB and RC (Rotary Air Blast and Reverse Circulation)
  • Advancing Casing ODEX
  • Mud Rotary
  • Micro Piles
  • SPT Hammer (Needs Hammer)
  • Diamond Core (Needs Additional Accessory Package)
    
    
• Features:
  • 34” Width for Tight Access - Fits Through Doorways
  • 89" Height
  • 10,000 lbs. Pullback
  • 3,500 lbs. Torque
  • Retractable/Extendable Tracks
  • Low-Impact Rubber Tracks
  • Class Leading 45HP Power Unit
  • Runs 2.5ft Tooling
  • Removable Foot Clamp and Breakout Wrench
  • Can be Broken Down into (3) Light-Weight Modules for Helicopter Transport
    
    
• Depth Capacities: (Based on 300 CFM/200 PSI Compressor - *Depending on ground conditions)
  • 4-1/2” Solid Stem Auger: 200ft/60m*
  • 6-5/8” Hollow Stem Auger: 75ft/23m*
  • 3-1/2” (89mm) Air Rotary Drilling: 300ft/100m*
    
    
• General Model Specifications:
  • Prime Mover:
    • Standard Unit: Kubota V1505T, 4-Cylinder, Turbo-Charged Diesel Engine
    • Power: 44.2 HP @ 3000 RPM
  • Track & Undercarriage Package:
    • Model: Chermack 2B 60” Track
    • Design: Compact, Rubber Track Set
    • Speed: 2.6 MPH
    • Stabilizers: (4) Hydraulic Stabilizers
  • Top Drive Rotation Unit:
    • Max Torque: 2,500 lbs./ft
    • RPM: 0-95 RPM
    • Spindle: Floating w/ HD U-Joint Assembly 1-5/8” Hex
    • Rotation Motor: Char-Lynn 6K Series
  • Mast and Feed:
    • Design: Double Rod Cylinder and Chain Feed
    • Pullback: 12,500 lbs.
    • Pulldown: 12,500 lbs.
    • Feed Stroke: 66” - Longer Feed Stroke Option Available
    • Working Angle: 45° to 90° Degree
  • Hydraulic System:
    • Design: Fully Hydraulic, No Electronics, Open Loops
    • Capacity: 20 GPM
    • System Pressure: 3000 PSI
    • Filtration: 10 micron
    • Components: Sauer Danfoss, Char-Lynn & Parker
    • Heat Exchanger: Air-Oil
  • Control Panel:
    • Panel: Feed, Rotate, L&R Track, SPT Hammer Control and Setup Functions
    • Gauges: Rotation, Holdback & Air Pressure
    • Opening: 6 - 1/4”
  • Footclamp:
    • Design: Two Hydraulic Cylinder & Jaw/Bolt-on, Removable Design
    • Clamping Force: 20,000 lbs.
    • Opening: 6 -1/4”
      
      
• Dimensions: (Working)
  • Length: 8ft 3in (2.5m)
  • Width:
    • Tracks Out: 5ft 6in (1.7m)
    • Tracks In: 2ft 8in (0.85m)
  • Height:
    • Mast Up: 7ft 5in (2.4m) 
    • Walking: 6ft (1.8m)
      
      
• Dimensions: (Transport)
  • Length: 115in
  • Width: 34in
  • Height: 69in 
  • Weight: 3,500 Lbs.
    
    
• Location: Western Canada

View More Crawler Drills