16in Dia. x 21ft Long Stainless Steel Screw Conveyor ID: 1469122

16in Dia. x 21ft Long Stainless Steel Screw Conveyor

• Make: Conveyor Systems, Cedar Rapids, IA
• Year: 2015
• Type: Screw Auger Conveyor 
• Condition: Unused Surplus 
• Application: Cooling Service Design
• Enclosure: U-Trough
• Configuration: Horizontal
• Screws: 2 Screws
• Diameter: 16in Dia.
• Length: 21ft 
• Flites - Pitch: 15in
• Flites - Conveyor Blades: 4in High x 3/8in Thick Material - Flites Do Not Overlap
• Trough: U-Trough Design 
  • Open Jacketed on Sides and Bottom
  • Trough has External CIP or Cooling Spray Nozzles in Vaulted Section of Top Cover
• Conveyor Shaft: 3.375in Dia.
  • Supported by (2) Outboard Roller Bearings
  • Shaft is Sealed at Trough Ends
  • Inside the Trough the Conveyor Flite Shaft is Approx. 8.5in Dia.
• Screw Construction: Stainless Steel
• Trough Construction: Stainless Steel, Jacketed, Open, Non-Pressurized
• Top Cover Construction: Stainless Steel. Bolted Full Covers. 
• Inlet: 34in Wide x 17in Flanged
• Discharge: 34in x 17in Flanged
• Drive: (2) Electric Motors - (1) Motor Per Shaft
  • Power Output: 10HP
  • Rotating Speed: Est. 20-70 RPM (TBC)
  • Voltage: 230/460 Volt
  • Frequency: 60Hz
  • Phase: 3-Phase 
  • Reducer: Dodge Shaft Mount Reducer.
    • Ratio 23:1
    • Output: 73 RPM
      
      
• Shipping Dimensions:
  • Length: 25ft
  • Width: 3ft
  • Height: 3ft
  • Weight: 3,500 Lbs. Approx.
    
    
• Location: Southern USA

View More Augers