TIME Advanced Stoper Longhole Drill
- Make: TIME
- Model: Advanced Stoper
- Year: 2023
- Type: Longhole Drill
- Condition: New, No Hours
- Drill: S36 IR Drifter Drill
- Aluminum Feed
- Heavy-Duty Centralizer (Used)
- Nominal Diameter: 35 - 89 mm (1.38in-3.5in)
- Nominal Length: Up To 46m (Up To 150ft)
- Reamed Diameter: Up To 127mm (Up To 5in)
- Blows/Minute: 1630 @ 500 kPa (1630 @ 72.52 PSI)
- Air Consumption: 14m³/min @ 500 kPa (494.41 CFM @ 72.52 PSI)
- Traverse: 5ft Traverse
- Side to Side Hole Positioning of 66in (168cm)
- (3) Helac Actuators for Increased Stability and Less Wear Parts
- 135° Dump, 360° Radial and an Optional 180° Pivot Positioning
- 135° Dump, 360° Radial and an Optional 180° Pivot Positioning
- Carrier:
- 30HP Radial Piston Air Motor (@1200 RPM)
- 116 PSI & 890 CFM Air Delivery
- Tandem Gear Hydraulic Pump
- 1.91in³ Per Rev. @3000 PSI
- High Quality Proportional Directional Control Valves
- High Quality Motion Control and Cross-Port Check Valves
- Two Lever Pilot (Low) Pressure Tethered Remote Tramming Valve
- Skid Steering with Independent Port and Starboard Wheel Drives
- Planetary 4-Wheel Hydraulic Drive with Fail-Safe Brakes
- 4 Independent Heavy-Duty Jacks with Load Lock (Cross Port Check) Valves for Leveling
- Tow-Bar and Dis-Engaging Wheel Drives for Towing
- Rotation Barrier – Double Hinged (Opens from the Left or Right Side)
- 30HP Radial Piston Air Motor (@1200 RPM)
- Location: Eastern Canada
View More Jumbo Drills
Image 1 of 7