Sell Your Equipment Financing - Apply now
2001 Portable 500 TPH Recycle Counter Flow Astec Plant ID: 291728
Need this? Click here Have one? Click here
- 2001 Cold Feed System
- Fully Portable
- Model: 4BF-130691-2A
- 5 Bin System
- (5) 9ft. x 14ft. Bins with
- Extensions
- Dividers
- on a Portable Frame
- Triple Axle Portability Package
- Feeders
- 30in. x 10ft. long
- Driven by 5 HP AC Motors
- Collecting Conveyor
- 20ft. Foldable Stinger on the end for Transportation
- Cold Feed System
- Sits on Steel Legs
- Bins Include Free Standing Relocatable Ramp Wall
- Side Mounted NEMA Box with
- 5 Updated A.C Variable Frequency Inverters
- 5 Bin System
- Model: PSS-512 (Screen and Conveyor System)
- 4ft. x 12ft. Double Deck Screen
- Astec Portable 34in. wide 85ft. long Heavy Channel Frame Belt Conveyor
- Feeds a 500 TPH Pugmill
- Single Axle
- Hydraulic Raise
- Model: PLM T500-60
- 500 TPH Twin Shaft Pugmill with
- Two Drive Motors
- Material Bypass Chute
- 34in. x 40ft. Incline Weigh Bridge Channel Conveyor
- Feeds Dryer
- Single Axle Chassis
- 500 TPH Twin Shaft Pugmill with
- 2001 Counter Flow Dryer
- Model: PAD 937C
- Astec Portable Quad-Axle Counter Flow Recycle Dryer
- 9ft. dia and 37ft. long
- Chain Driven by
- Single 200 HP Drive Package
- Gravity Feed Chute into Dryer
- Hauck SJO 750 Burner Burn Recycled Oil
- Powered by a 200 HP Motor
- Dryer Dumps the Dried Materals into Mixing Drum
- Dryer Assembly Includes
- Steel Timber Cribbing
- Hydraulic Leveling
- Shell has an Average Thickness of .400
- Drive Chain and Sprockets have 75% Life Left
- 2001 Mixing Drum
- Model: BTX822
- Astec Portable Tandem Axle Mixing Drum
- 8ft. Dia. and 22ft. Long
- Trunnion Driven by 4 x 25 HP Motors
- Gravity Feed Chute Introduces Virgin Materials and Recycle into the Drum
- Shell has Insulation and Stainless Steel Skin Wrapped around for Heat Retention
- Front has the Scavenger Fan Mounted Over Goose Neck
- Triple Axle
- 2012 Wrap Around Recycle System
- 2 Bin System
- (2) 8 ft. dia and 22ft. long
- Heavy Duty Incline Grizzly's
- Bin Vibrators
- Bins Feeders are Horizontal with
- 36in. x 16ft. Variable Speed Feeders
- 10 HP A.C Motors
- Variable Frequency Drives are Mounted in a Nema Side Cabinet
- Feed a 36in. Incline Channel Conveyor to a Single Deck Screen
- 4ft. x 10ft. Single Deck Screen Feeds Over Flow Materials back to a Frame Mounted Rap Crusher to Re-Feed the Screen Again.
- Weigh Belt Conveyor is Mounted on a Common Portable Tandem Axle Self-Erecting Frame
- 36in. wide and 60ft. long Lattice Conveyor has a Single Axle and 20 HP Motor
- 2001 Pollution Control
- Model: PBH 85SP
- Portable Astec Direct Pulse Baghouse
- Filters 85,000 CFM of Dust-Landen Air at a 5.8 to 1 Air to Cloth Ration with 1400 Bags
- All Inlet and Outlet Dust Work with an Asec Fan
- Twin 200 HP Motors
- Inlet Damper
- Dust Removed from Baghouse by Tandem Auger's Driven by a 5 HP Motor
- 40 HP Screw Type Air Compressor Provides the Air
- Baghouse Fan on a Tandem Axle Trailer
- Primary Cyclone Mounted on the M.C Trailer for Precleaning of Heavy Dust Particulates
- Approx. 150,000 Tons on the Bags
- 2001 Asphalt Storage System
- Model: SEB10036
- Astec 100- Ton Self Erect Surge Bin System
- Holding Capactiy: 100 Tons Weighing 120 Pounds per Cubic Foot
- Clam Gates have a 5ft. x 18in. Opening
- 36in. Double Chain Slat Conveyor has a Reject Gate and Can Handle 500 TPH with a 75 HP Motor
- 100-Ton Surge Bin is Mounted on Load Cells for Accurate load out into Trucks
- Whole Unit is Mounted on a Quad Axle Assembley for Transportation
- 2001 Control House with Controls
- Astec Pilot III Control House is One Room 10ft. x 22ft.
- Atsec Controls were Upgraded to New Astec PM-2 Computer Controls
- Mixing Drum
- Baghouse Cross Screw
- Dryer Motors are Set Up with Frequency Drive Inverters
- Single Axle
- 2001 Motor Control Center
- Model: PCY 855PS03
- Motor Control Center with All Starters and Breakers is Mounted on the Front of the Cyclone
- 15,000 Gallon Fuel Tank
- M.C are Seimens and Includes Soft Starts for the Burner Mixing Drum and Baghouse Exhaust Fan Motors
- S/O Type Wiring with Quick Disconnect Plugs
- Tandem Axle Trailer
- Liquid Asphalt System
- One 2001 CEI 30,000 Gallon Single Compartment with AC Metering Pump
- Heatec
- Model: HC-100a/
- 1 MBTU Combo Oil/Gas Hot oil Heater is mOunted along with Unloading Pump Mounted on a Goose-Neck on Tank
- Tank is Mounted on a Triple Axle Frame
- 4in. Plant Metering Skid on the Rear Deck of A.C Tank
- Other Equipment
- 8ft. x 40ft. Portable Trailer is Provided for the Spare Parts for the Plant
- Hydraulic Pump Kit is Loacted inside along with Misc. Bags, Belts, Bearings etc.
- Location: Eastern USA
View more Ashpalt Plants
Sold
Image 1 of 1