2016 Atlas Copco SmartROC T45 Drill

• Make: Atlas Copco
• Model: SmartROC T45-11
• Year: 2016
• Type: Quarry and Construction Drill
• Hours: 10,771 Total Hours
  • Impact Hours: 4,252 Hours - Only 83 Percussion Hours since last Drifter Service/Reseal
  • Engine Hours: 10,771 Hours
• Condition: Used Condition
• Configured for T51 Tooling
• Drilling Method: Tophammer
• Rock Drill: Atlas Copco COP 2560
• Boom: Folding Boom
• Engine: CAT 9.3 Diesel Engine
• Compressor: Atlas Copco C146-07 - 472 CFM @ 174 PSI
  
  
• General Model Specifications:
  • Hole Range:
    • T45, T51: 89–127mm (3.5”– 5”)
    • Max Hole Depth: 29m (95ft) - Hydraulic Rod Handling System, with 3.6m (12’) Extension Rods and a 4.2m (14’) Starter Rod
  • Rock Drill: COP 2560
    • Impact Power: 25kW (33.5HP)
    • Hydraulic Pressure: 230 bar (3,335 PSI)
    • Impact Rate: 44Hz
    • Torque: 1,555Nm (1,147 lbf/ft)
  • Feed: T45 with Folding Boom
    • Feed Extension: 1,150mm (3’ 9’’)
    • Feed Rate, Max: 0.9 m/s (177 ft/min)
    • Feed Force, Max :20kN (4,496 lbf)
    • Tractive Pull, Max: 30kN (6,744 lbf)
    • Total Length: 7,700mm (25’ 3’’)
    • Travel Length: 4,610mm (15’ 2’’)
  • Compressor: Atlas Copco C146-07, Screw Type Compressor
    • Working Pressure, Max: 12 bar (174 PSI)
    • FAD, at Normal Working Pressure: 223 l/s (472 CFM)
  • Dust Collector: DCT 200
    • Filter Area: 20m² (215 sq.ft)
    • Number of Filter Elements: 20 pcs 
    • Suction Capacity at 500mm W.G: 540 l/s (1,144 CFM)
    • Suction Hose Diam: 127mm (5’’)
    • Cleaning Air Pressure, Max: 7.5 bar (109 PSI)
    • Cleaning Air Consumption: 2-4 l/pulse (0.06 - 0.12 cu.ft/pulse)
  • Carrier:
    • Tramming Speed: 3.4 km/h (2.1 mph)
    • Track Oscillation: ±10°
    • Ground Clearance: 405mm (16”)
  • Main Components:
    • Crawler Type Two-Speed Undercarriage with Track Oscillation System
    • Caterpillar Turbocharged Diesel Engine
    • Atlas Copco Screw Type Compressor
    • Dust Pre Separator
    • Combined Warning Sound and Warning Light
    • Folding Boom System
    • Automatic Cooler Fan Control
    • Air Flow Switch
    • Rock Drill Lubrication System
    • COP Logic
    • Toe-Hole Drilling System
    • Carousel Type Rod Handling System
    • Hydraulic Double Drill Steel Support with Movable Dust Collector Hood
    • Double Hose Drum
    • Dust Collection System
    • AutoPos
    • Automatic Rod Adding
    • Operator’s Cabin, ROPS and FOPS Approved
      
      
• Location: USA

View More Quarry Drills