Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Lorain MCH 350 35 Ton Truck Crane ID: 490597
- Model: MCH 350
- Capacity: 35 Tons
- Hydraulic
- 81 ft. Main
- 28 ft. Jib
- Swing Out
- Cummins Engines
- Anti-Block
- Location: Western USA
View more Mobile Cranes
Bilt-Rite Self Contained Compactor ID: 231730
- Model: B1035 SC
- Mfg: 2007
- HP: 10
- Volts: 600
- Location: Eastern Canada
View more Recycling Equipment
United Conveyor Corp. 2102 Grinder ID: 222567
- Model: 2102-107-3-1.
- Used in size reducing applications such as glass, hard clay, brick, and concrete blocks.
- 12 in. x 10 in. x 6 in. down to 1.5 in. minus.
- Up to 35 TPH.
- Top opening measures: 20 in. wide x 24 in. long.
- Weight: 1,568 lbs.
- Location: Eastern U.S.A.
View more Grinding Machines
JV Closed Door Baler ID: 235085
- Model: HX-72
- HP: 30
- 8" Cylinder
- 40" x 60" Feed Opening
- Shear Blade
- Bale Size 72" x 42" x 48"
- Location: Eastern USA
View more Recycling Equipment
BloApCo OCC Shredder ID: 351574
- 58in. Opening
- 40 HP
- Opening Size: 58in. x 36in.
- Location: Eastern USA
View more Shredders
Pulsafeeder Series 880 Diaphragm Metering Pump ID: 193106
- Serial No.: 9776987-1.
- Max. flow: 21GPM. 1/2HP, 1750RPM, 90 volt DC motor.
- Gear ratio: 15:1.
- Max. Flow: 21 GP.
- Max. Press: 290 PSIG.
- Piston diameter: 1.25 In.
- Reliance Electric Small DC 1/2 HP Motor
- Volts: 90V.
- RPM: 1750.
- Amps: 5.20.
- Amb.: 40 Deg. Cels.
- Insul.: F.
- Encl.: Totally Enclosed, Fan-Cooled (TEFC).
- Reliance Electric DC2 Motor Controller:
- Model No.: DC2-70U.
- 1.0/2.0 HP.
- Input: 115/230 VAC.
- Output: 90/180 VDC.
- DC Field: 50/100 VDC.
- Phase: 1.
- Hz: 50/60.
- Short Circuit Rating.
- Encl. Type: 12.
View more Diaphragm Pumps
Maren Top Feed Shredder ID: 255311
- Model 3036TF
- 30 HP
- 3 Phase
- Location: Eastern USA
View more Shredder
Dual Shaft Shredder ID: 1401425
- Type: Dual Shaft Shredder
- Previous Use: Shredding of Tires (With the Old Set of Teeth, Hours Unknown) and Shredding of Plastics (With the New Set of Teeth, 200 Hours at +350 kg/h)
- Knife Speed: 15 RPM
- Inlet Hopper: 44in x 20in
- Shredding Area: 44 x 20in
- Weight: Approximately 1 Ton
- (2) 25HP Electric Motors
- Voltage: 480 Volts
- Included:
- Feed Hopper
- Transformer 600V-480V
- Combs on Both Sides
- Stand For Crusher - Conveyor Under Stand Not Included
- Gearbox for Rotating Shafts
- Complete Control Panel with Programmable Controller
- Used Set of (24) Large Teeth - Inserts Must be Made to Fit the Re-Machined Shafts
- Set of (74) 8in Diameter, 3-Prong Knives in H500 Steel
- Recent Repairs:
- The Gearbox has been Rebuilt
- Shafts have been Re-Machined
- New Roller Bearings
- No New Repairs Needed
- Location: Eastern Canada
View More Industrial Shredders
Balemaster AT-1-40 Baler ID: 235783
- Model: At-1-40
- HP: 25
- Volts: 460
- 6" Cylinder
- 32" x 27" Feed Opening
- Mathews 24" W Rubber In-Feed Conveyor
- Location: Eastern Canada
View more Recycling Equipment
American Pulverizer 200 HP Vertical Shaft Paper Shredder ID: 335743
- Vertical Shaft Paper Shredder
- 200HP
- Infeed Conveyor
- Cart Dumper
- Dump and Run System
- Location: Eastern USA
View more Shredders
Carrier 36 x 60 Vibrating Pan Feeders ID: 186146
- 36 in. wide.
- 60 in. long.
- Quantity: 2.
Please contact us for more information.
View more Vibrating Pan Feeders
Lindner Single Shaft Shredder ID: 356848
- Model: MS2000
- Feed Opening: 80in. x 65in.
- Rotor Length: 80in.
- 22in. Diameter Rotor
- 100 HP
- 104 New Cutters
- Screen Size: 1-1/2in.
- Swing Arm Hydraulic Ram
- Location: Eastern USA
View more Shredders
Atlas Copco FlexiROC T 20 R ID: 229997
- Low Hours
- Remote Control Drive
- Winch
- Hydraulic Ground Support
- Turntable
- Location: Europe
View More Drills
Manufacturer: | ATLAS COPCO |
Franklin 50 HP submersible pump motor ID: 45197
- 50 HP
- 30/460 volt
- 3 phase.
- Unit is rebuilt and comes with 75 feet of cable.
MSI Xtruder 255 Concentrating Table ID: 811552
- Capacity: Up to 255 lbs./hr.
- Recovers fine gold down to 400 mesh.
- Full variable speed control and simple to operate.
- Minimal water requirement: 6 to 10 gallons per minute.
- Fresh water can be used or pumped with its own recirculation pump.
- Water is filtered and reapplied at the precise pressure needed.
- MSI Xtruder Table is similar to a Gemini Table and is considered a gold shaking table or sometimes a gold finishing table.
- These concentrating tables are used in the final step before smelting.
- Location: Western, USA
View more Gold Concentrating Tables
Warman 0659VSPMC-3 SRL Pump ID: 226849
- Model : 0659VSPMC-E.
- Rubber lined.
- 20 hp motor.
- Volts : 480.
- RPM : 1765.
- Ph : 3.
- Hz : 60.
- Frame : 256T.
- Pump Weight : 1512 lbs.
- Location: Western, U.S.A.
- Request Quote for more information.
View more Sump Pumps
2003 Challenger Plastic Shredder ID: 290766
- Model: CG-600-4055 F-D-T
- Mfg: 2003
- 150 HP (Dual 75 HP Motors)
- 2-Station Ram Feed: 7.5 HP
- Shredders, Plastics
- Singe Shaft Shredder
- Hopper Size Opening: 75 in. x 65 in.
- Rotor Diameter: 15 in.
- Number of Cutters: 180
- Auto Reverse: Yes
- Controller
- Shihlin Electric
- SEPLC AX1s 30MR-ES
- Location: Eastern USA
View more Shredders
Ty-Rock 6 ft x 16 ft Inclined Screen ID: 159796
- Two deck.
- 6 ft. wide.
- 16 ft. long.
- Offset screens.
- Includes support structure and drive motor.
Please contact us for more information.
View more Inclined Screens