Wanted EquipmentSell Your Equipment Financing Now Available
Sell Your Equipment
Please provide us with as much detail as possible and we will get back to you.
INFORMATION REQUESTED:
Please include all available information such as Year, Make, Model, Condition, Location and Asking Price.
Sandvik D75KS Rotary Drill ID: 1401186
Sandvik D75KS Rotary Drill
- Make: Sandvik
- Model: D75KS
- Drilling Method: Rotary
- Track Mounted
- Hole Size: 229mm to 279mm (9in to 11in) Diameter Holes
- Multi-Pass Drill for up to 53m (173ft) High Benches
- Pulldown: 334 kN (75,000 lbf)
- Bit Load: up to 409 kN (92,000 lbf)
- Year: 2011
- Condition: Used - Good, General Working Condition
- Hours: 17,555 Hours
- Major Components Changed-Out:
- Track Repairs: 4,925.8 Hours (Changed out at 12,629.2 Hours)
- Compressor: 3,878.2 Hours (Changed out at 13,676.8 Hours)
- Engine Rebuild: 3,317.6 Hours: (Changed out at 14,237.4 Hours)
- Rotary Head: 1,544.7 Hours (Changed out at 16,010.3 Hours)
- Feed Cylinder: 1,351.5 Hours (Changed out at 16,203.5 Hours)
- Rotation Motors: 711.1 Hours (Changed out at 16,843.9 Hours)
- Carousel Hanger Bracket: 556.2 Hours (Changed out at 16,998.8 Hours)
- Major Components Changed-Out:
- Tram Hour Reading: 1,346 hours
- Engine: CAT 3412 (760HP)
- Rebuild Done by Barloworld
- Fitted with (2) New Starters
- Fitted with (4) New Batteries
- Compressor: Sullair
- Model: No. 25
- Hours: 3,878 Hours
- New Compressor and Air-End have been Fitted
- Rotary Head:
- Hours: 1,544.7
- Very Good Condition
- Mast:
- Mast Pins and Bushes are New
- Mast Structure in Very Good Condition and Well Looked After
- (2) New Rotation Motors
- Mast Slides appear to be in a Very Good Condition, No Deep Marks or Scoring Visible
- Mast Chains are in a Good Condition and Properly Tensioned
- Rod Handlers are Working and in Good Condition
- Hydraulic Components:
- Hydraulic Cylinders are in Good, Working Order
- Mast Lift Cylinders were Recently Reconditioning and are Basically as New
- No Evidence of any Scoring on Cylinder Shafts; All Cylinder Seals are Intact
- All (3) Outriggers are Functional
- All Hydraulic Motors are in Good Working Order
- Undercarriage:
- Undercarriage in Very Good Condition, with CAT Sprockets and Rollers from ITR
- Shoes, Bushes, Idlers, and Rollers are in Very Good Condition
- Track Repairs were Done by Barloworld
- Safety Devices/Features:
- Rig is Equipped with Spotlights for Illumination
- Fire Suppression System - needs Refill and Recertification
- Add-Ons:
- On-Board Automated Lubrication System
- Depth Counter
- Emergency Stop Switches in Cab and Exterior
- View Spec Sheet Below
- Location: South Africa
View More Rotary Drills