New and Used Reciprocating Plate Feeders for Sale
Savona Equipment a reciprocating feeder supplier worldwide which use a back-and-forth shaking tray to feed abrasive materials into process units for large primary ore crushing, secondary, and tertiary fine material as well as complete aggregate, recycling, mining, and sawmill operations. Reciprocating plate feeder parts can be supplied new and used but are subject to availability.
Reciprocating Plate Feeders Definition: There are two types; Ale Shear Gate type Plate Feeder employs a conventional plane- flow hopper in which the feeding action depends on the development of a shear plane in the bulk solid. This type of feeder is limited to use with bulk solids of controlled particle size. The Open Front type Plate Feeder involves the total movement of the mass of the solid on the plate during the forward stroke, with feeding being dependent on funnel flow in the rear portion of the hopper. This type of feeder is relevant to the handling of ROM containing large lumps. In both cases, feeding takes place during each return stroke of the plate.
Amandus Kahl M500 Reciprocating FeederType: M500. 316 Stainless steel construction. Sew-Eurodrive: RPM: 1740/11ID: 207698Quote +
Nico 54 in x 12 ft Hydrastroke FeederNico Hydrastroke Feeder. 54 in. wide. 12 ft. long. Equipped with: 50 hID: 135684Quote +
Fine Ore 2 TPH Hopper Feeder Module1+ yard fine ore hopper. Capacity: 2 tons per hour. Magnetic metering feeder: ID: 194282SoldQuote +
Hopper Feeder 8 ft. x 8 ft. x 6 ft. Deep4 ton capacity. 6 in. spaced fixed grizzly. 24 in. wide plate feeder. Chain driID: 82237SoldQuote +