Ford 35 kW Natural Gas Generator ID: 143548

• Ford 35 kW Natural Gas Generator.
  • Year: 2007.
    • 1,800 rpm.
      • 120/240V.
      • Single phase, 60 Hz.

Please contact us for more information.

Mobile Loading Ramp ID: 230339

• 10 Ton Capacity
• 32' L x 7'6" W With 9' Upper Flat
• Location: West Coast

View More Forklifts 

Klemm KR 704 D/E Hydraulic Rotary Drill ID: 138703

• Klemm Hydraulic Rotary Drill.
  • Model: KR 704 D/E.
    • Year: 1997.
    • Hours: 5000.
  • Equipped with:
    • Perkins 125 kVA Generator.
      • 6 cylinder water cooled.
      • Engine completely rebuilt.
    • Double clamps fitted.
    • 25m of electric cable.
  • Complete with:
    • Generator and clamps fitted.
  • Capable for air/water and grout injection.

Please contact us for more information.

PTR Stationary Compactor ID: 336890

• Model: TP4000HP
• DOM: 2004
• 4 yd³ Compactor
• 20 HP Power Unit
• 1/2 in. AR Floor 
• 3/8 in. Side Walls
• Location: Eastern USA

View more Waste Compactors and Sorters

Onan 35 kW Natural Gas Generator ID: 138651

• Onan 35 kW Natural Gas Generator.
  • 1 available.
    • 3600 rpm.
      • 277/480V.
        • 3 phase.
  • Chrysler 4 cylinder engine.
    • Model: H135-87-315.

Please contact us for more information.

Boart Longyear Stopemaster HX Long Hole Drill ID: 180287

• Drill: HD155.
• Model: Stopemaster HX.
• Hours: 1588.
• Year: 2008.
• Engine: Deutz F3L2011.
• 600V.
• All functions tested and verified.

View more Rotary Drills

Progressive Industries Micro-Sizer Air Classifier ID: 572957

The Mini-Sizer:

• Belt Driven by a
  • 3hp Baldor Inverter Duty Motor
    • 230/460 Volt
    • 1750 rpm
• 12 in. Dia. Cyclone
• 14 in. Dia. Blower.
• Belt driven by a 3 hp, 3480 rpm Motor.
• 208-230/460 Volt.

• 4 in. Rotary Valves on Material Feed, Classifier and Cyclone Discharges.
  • Chain Driven by Winsmith 917 Series Gear-Head Motors.
  • .33 hp
  • 230/460 Volt.
  • 1730 rpm
  • 40 – 1 Reducer Ratio
• This is a lab sized unit that will do approx. 1 lb. - 100 lbs./hour.
• Location: British Columbia, Canada

View more Classifiers and Sandscrews

MSI Xtruder 255 Concentrating Table ID: 1424719

MSI Xtruder 255 Concentrating Table

• Make: MSI
• Model: Xtruder 255
• Type: Concentrating Table
• Condition: Used, Reported in Good Condition
• Capacity: Up To 255 Lbs/Hr.
• Recovers Fine Gold Down To 400 Mesh
• Full Variable Speed Control And Simple To Operate
• Voltage: 115 Volt - Single Phase
• Minimal Water Requirement: 6 to 10 Gallons Per Minute
  • Fresh Water Can Be Used or Pumped With Its Own Recirculation Pump
  • Water Is Filtered And Reapplied At The Precise Pressure Needed
• MSI Xtruder Table is Similar To A Gemini Table And Is Considered a Gold Shaking Table Or A Gold Finishing Table
• These Concentrating Tables Are Used In The Final Step Before Smelting
  
  
• Location: Northwest USA

View More Gold Concentrating Tables

Watch YouTube Video Here: https://www.youtube.com/watch?v=pc8oy0f4WLQ