- Specifications:
- Ton: 75.
- Wheelbase: 225 In. (5715 mm.).
- Carrier: 8 x 4.
- Frame:
- Box welded frame members designed and manufactured to provide adequate support for crane weight and capacities.
- High strength allow steel used throughout the construction of the carrier.
- Tow bars are provided front and rear.
- Full length fenders.
- Locked side mounted storage box and float storage racks.
- Hydraulic Outriggers:
- 2 independent housings fabricated from "T-1 steel', or equivalent.
- Outrigger beams with horizontal hydraulic movement, automatic check and manual shut-off valves in hydraulic jacks to assure maximum safety for all lifts.
- Hardened chrome plated rams
- Fitted with 36 In. (914.4mm) dia.
- T-1 steel floats.
- Pin connected and removable.
- Roller mounted sliding beams with screw jacks are optional.
- Standard Engine:
- General Motors 6-71N diesel.
- 6 cylinder.
- 4 1/4 In. (107.99 mm.) bore x 5 In. (127 mm.) stroke.
- 426 cu. in. (6982 cu. cm.) displacement.
- Rated 238 HP @ 2100 RPM.
- Thermostatically controlled radiator shutters.
- Fuel tank:
- One 60 (U.S.) gallon (227 L) fuel tank.
- Electrical:
- Standard engine- 12 volt system.
- 500 watt alternator.
- 2-12 volt batteries in parallel.
- Power Steering:
- Garrison Twin-ram hydraulic power steering with Ross cam.
- 20 In. (508 mm.) dia. steering wheel.
- Clutch: Spicer 14 In. (355 mm.) 2 place pull type clutch.
- Hydraulically actuated.
- Main Transmission:
- Eaton Model T11605B, five speeds forward, and one reverse.
- Auxiliary Transmission:
- Spicer 7041 four speed.
- Front Axles:
- Eaton EFA-22T2 in tandem.
- Rear Axles:
- Clark planetary BD-57000 tandem assembly.
- Non-spin differential on leading axle.
- Ratio: 8.667:1.
- Suspension:
- Hendrickson solid mount with rubber bushed torque rods font and rear.
- Propel Shaft:
- Mechanics needle bearing.
- Service Brakes:
- Air on all wheels with 14.5 cfm (6844 cu. cm/sec) compressor and two reservoirs.
- Lining area:
- 16 1/2 In. (419 mm.) x 7 In. (177.8 mm.) (826 sq. in.) (5329 sq. cm.) rear.
- 17 1/2 In. (444.5 mm.) x 4 In. (101.6 mm.) (495 sq. in.) (3194 sq. cm.) front.
- 1321 sq. in. (8523 sq. cm.) total lining area.
- Emergency Brakes:
- Spring set.
- Air release system on both rear axles with operator's control on dash panel.
- One reserve air reservoir for release of spring set chambers.
- Wheels:
- Cast spoke front.
- Rear integrally cast with axles.
- 10.00 x 20 rims.
- Tires:
- 14:00 x 20.
- 18-PR non-directional mud and snow.
- Cab:
- One main cab.
- 32 In. (813 mm.) wide.
- Fully enclosed, offset to left side.
- Removable panel for engine access.
- Boom guide.
- Seats Inc. driver's seat.
- Tools:
- Air valve and tire inflation kit.
- Wheel wrench and bar.
- Axle bearing wrench.
- Performance:
- Maximum governed speed (High-high): 42 MPH (67.6 KPH).
- Minimum governed speed (Low-low): 1.17 MPH (1.88 KPH).
- Maximum gradeability based on wheel slip: 30%.
View more Mobile Cranes available
Image 1 of 7