• Wood Pellet Plant.
  • 5 to 8 tons per hour.
    • Put into operation late 2010 and closed early 2015 due to inconsistent wood supply.
    • Rated to produce 30,000 tons per year.
  • Complete with:
    • Log Deck.
    • 70 in. three blade disk type chipper with bottom discharge.
      • Reconditioned with 300 hp HD motor with less than 500 hours.
      • Lots of spare blades.
    • Belt live bed.
      • 20 in. top screw for distribution of chips with hydraulic pump.
    • Bliss 300 hp hammer mill.
      • Hammers replaced 4 months before shutdown.
      • Can produce up to 10 tons per hour of ¼ in. minus chips.
      • Spare screens.
    • Hammer mill cyclone with explosion top piping.
    • Fine dust cyclone.
    • 3 of top and bottom screw ¼ chip bin.
    • Refiner used for partial drying of very wet wood.
    • Bliss 500 hp Pellet mill.
      • Reconditioned in 2009 and 2015. 
        • New main shaft, bearings. New main rings manufactured and assembled by Bliss.
      • 2 new matching 250 hp HD motors were installed with 200 hours of use.
    • Crumbler.
    • Counterflow 5 ton cooler.
      • With cyclone and fan.
    • Screeners.
      • 1 by Rotex.
      • 1 by CME.
    • 18 ton recycle bin.
    • 18 ton pellet finishing bin.
    • Auto bagger (similar to Rethceif Model VFF-5020).
      • Bags up to 10 tons per hours.
      • Fully computerized.
      • Also includes a sealer and a manual bagger.
    • Forklift.
    • Electrical control room.
    • Electrical control panel.
    • Moisture meter.
    • Lot of screw conveyors and buckete elevators.
    • Several bins and silos.
  • Size of plant area is 10,000 ft² (two tents at 5,000 ft² each).
  • The above listings is partial and not all available items are listed.
  • Plant is reported to be in excellent condition.
  • Dismantling and loading available for an additional cost.
  • 2 building tents available for an additional cost.

Please contact us for more information.