Wanted EquipmentFinancing - Apply now

Equipment Quotes

Oro Industries Multistage Spiral Bank Concentrator ID: 560483


  • Spiral Rougher: 24 in.
  • Spiral Cleaner: 16 in. 
  • Spiral Finisher: 16 in.
  • 300 lb. Sand Filter
  • 3 Spiral Stand Set
  • 3 Tail/Sluice Set 
  • Complete Plumbing Manifold
  • Electrical Control Panel
  • Year: 2017
  • Location: Western USA

View more Centrifugal Gold Concentrators

Cummins 13 kW 120/240 Volt Natural Gas Generator ID: 935927


  • Model: RS13A
  • Rated Watts: 13 kW NG/ 13 kW LP 
  • Rated Amps: 54.2
  • Voltage: 120/240 Volts 
  • Single Phase 
  • AC Ton Rating: 5 Ton 
  • Enclosure: Aluminum 
  • Location: Western Canada

View more Generators

12 in x 78 in Belt Conveyor ID: 165309


  • 12 in. wide.
  • 6 ft. 6 in. long.
  • Boston ½ HP motor.
    • 208-230/460V.
    • 1725 rpm.
      • 3 phase.
    • Frame: 56C.
  • Boston gear reducer.
    • Ratio: 30:1.
    • Input HP: 0.65.
    • Output torque: 573.
  • Weight: 278 lbs / 126 kg.

 

View more Channel Conveyors

2011 Caterpillar D11T Dozer ID: 237423


  • Engine: 3508B
  • Capacity: 850 HP
  • Fire Suppression: A101 System w/ Automatic Check Fire
  • Air Conditioning
  • 2 Available
  • Location: Western Canada

View more Dozers

Baldor 7.5 HP 575 Volt Electric Motor ID: 666185


  • HP: 7.5
  • Voltage: 575
  • 1200 RPM
  • C/W D Flange 
  • Condition: Unused 
  • Location: Western Canada

View more Electric Motors

JWI 24in. Recessed Plate Hydraulic Filter Press ID: 406031


  • Model: 630-3
  • Max. Filtration Pressure: 100 PSI
  • 11 Plates
    • 24in. x 24in.
  • 4 - Corner Feed
  • Center Discharge
  • Hydraulic Close
  • Location: British Columbia, Canada

View more Plate Filters

Custom Thick Steel Welding Table ID: 455638


  • Dimensions: 89in. L x 66in. W x 28in. H
  • Table Top Thickness: 4in. 
  • Location: Western Canada

View more Shop Tools

Vecoplan Film and Fiber Shredder ID: 275585


  • 2012 Vecoplan VAZ 1300 M-FF DLX Shredder
  • Hopper Opening Size: 52" W x 58" Long
  • Abrasive Resistant Top Plate
  • 15" Diameter Shaft x 52" Long
  • Solid Stub Shaft Design w/ Interchangeable Roto Profiles to High Production Profile
  • High Manganese Content for Abrasion Resistance
  • Double-Walled Cutting Chamber, to Prevent Bearing Contamination or Sidewall Wear.
  • 150 HP TEFC
  • 135 RPM
  • Driveshaft Power Transfer to Fluid Clutch.
  • Hydraulic Screen Lift
  • Controller
  • Allen Bradley Controls
  • Includes:
    • Vecoplan's Patented SureCut Film & Fiber Processing Package
  • Location: Southern USA

View more Shredders

Cummins 800 kW 400 Volt Diesel Generator ID: 1004098


  • Voltage: 400 Volt 
  • Hours: 300
  • Cummins KTA50-G1 Engine 
  • Stamford Model B704S Alternator 
  • 1500 RPM 
  • 50 HZ
  • Skid Mounted 
  • Electric Remote Radiator 
  • Free Standing Control Panel 
  • Location: Europe 

View more Diesel Generators 

8in x 8in Morse Bros Jaw Crusher ID: 1174315


8in x 8in Morse Bros Jaw Crusher 

  • Make: Morse Bros
  • Model: LC-24
  • Serial: 4000-048
  • Size: 8in x 8in
  • Condition: Good, Used
  • Toggle: Single Toggle
  • Jaw Plates: Corrugated and Reversible

  • Max Feed: 6.5in
  • Min Discharge: 0.25in 
  • Max Capacity: 4,000 lbs./hr.

  • Drive: New 12HP Honda GX390-QAE2 Electric Start Engine

  • Additional Information:
    • Skid Mounted
    • Feed Hopper Included
    • New Jaw Tension Bar
    • New HD Centrifugal Clutch
       
  • Overall Dimensions:
    • Length: 75in
    • Width: 41in
    • Height: 52in
    • Weight: 3,700 Lbs.

  • Location: Western Canada

View More Jaw Crushers

Sandvik QJ341 Jaw Crusher ID: 108873


  • Sandvik QJ341 Mobile Jaw Crusher.
    • Year: 2012.
    • Hours: 942.

 

  • Please contact us for more information.
Manufacturer:Sandvik

RDH HM-800-30 Underground Truck ID: 895842


RDH HM-800-30 Underground Truck

  • Make: RDH
  • Model: HM-800-30
  • Year: 2014
  • Condition: Excellent
  • Box Size: 13.63m³ (17.8yd³)
  • Payload: 30,000kg (30 Tons)

  • Engine: Caterpillar C15 (475-580HP)
  • Torque Converter: Dana 9000 Series
  • Transmission: Dana 6000 Series
    • 4 Speeds Forward and Reverse, 4-Wheel Drive
  • Axles: 
    • Front Axle:
      • Dana 19D Planetary-Type
      • ± 7° Oscillation 
    • Rear Axle:
      • Dana 19D Planetary-Type
      • Fixed
  • Brakes: Wet Disc Internal SAHR
  • Tires: 18.00R25 - Very Good Rubber
  • Canopy: ROPS/FOPS Certified Operator Compartment 
  • Fire Suppression: Ansul Fire Suppression 

  • Overall Dimensions:
    • Length: 10,070mm (396")
    • Width: 2,670mm (105")
    • Height: 2,504mm (99")
    • Weight: 30,700kg (67,682 Lbs)

  • Additional Notes:
    • Fuel Tank Capacity: 398 Liters
    • Steering:
      • Hydraulic, Articulated
      • Steering Angle: + 42°
    • Hydraulics:
      • Steering And Hoist: 170 bar, 190 L/min/2200 rpm
      • Hydraulic Oil Tank Volume: 379 L
    • Electrical System:
      • 24 V
      • Battery: 2 x 12 VDC
      • Tramming/Working LED Lights: 4 Front / 4 Rear
      • Brake Lights: 2 Rear
      • Horn & Reverse Alarm
    • Turning Radius:
      • Inside Turning Radius: 5,329mm (210")
      • Outside Turning Radius: 9,144mm (360")
    • Central Grease Point
    • Suspension Seating
    • Cabin Has Heat/A.C.
    • Ground Clearance: 362mm (14")

  • Location: Canada

View More Underground Trucks

Vecoplan Single Shaft Shredder ID: 277869


  • Model: RG42-60XL
  • Mfg: 2008
  • 60 HP
    • 460 Volts
  • 48 Cutters
  • 15" Diameter Rotor
  • Hydraulic 2 Speed Ram with 
    • Self-Contained Power Unit
  • Allen Bradley Controls
  • Includes:
    • Conveyor 
    • Hopper
  • Location: Western USA

View more Shredders

Browse Equipment Remove AllSubmit Quote
First Name
Last Name
Email Address
Phone
Questions, Information and Comments
Project Location

Additional Information

Additional information is helpful to make sure we provide you with the best service possible. However it is not required

Company
Address
City
Country
State / Province
ZIP Code
Website
Ore / Material
Tons Per Hour