Hyster 15,500 lbs Forklift ID: 358259

• Model: H155XL
• Max Lift Capacity: 15500 lbs.
• Lowered Height: 146in.
• Raised Height: 212in.
• Hours: 2686
• Tire Type: Dual Pneumatic
• 2-stage
• Fuel Type: LP
• Attachment: SS
• Year: 1995
• Location: Western Canada

View more Forklifts

Boart Longyear Diamond Core Drill Package ID: 290838

Savona Equipment ltd. is offering a Boart Longyear diamond core drill package that includes 1 x Boart Longyear 50 and 1 x Boart Longyear 38 that are both skid mounted. Each drill comes with a half shack on skid with mud tanks and mixers.

Both drills are in excellent working condition.

The drills can be purchased together as a package or separately.

Below are more details and links to more photos for each drill:

https://www.savonaequipment.com/en/boart-longyear-50-diamond-core-drill-p196337

YouTube video: Longyear 50 Drill Running

• Year: 2007.
• Boart Longyear 50 Diamond Core Drill.
• Skid Mounted
• 6 Cylinder John Deere Drive.
• Longyear HQ Nitro Chuck.
• Hydraulic Wireline.
• 435 Hydraulic FMC Bean Pump.
• Hydraulic Mud Mixer.
• 2 mud tanks.
• 20 ft. tower.

https://www.savonaequipment.com/en/boart-longyear-38-diamond-drills-p233815

• Boart Longyear 38
• Skid Mounted
• HQ head.
• Hydraulic HQ Chuck
• 125 HP John Deere 4 cylinder motor.
• 4 speed Transmission
• Hydraulic wireline.
• 20 ft. Collapsible Tower.
• Mounted in skid shack.
• Mud tanks with mixer.
• Location: Western Canada

View more Dimond Core Drills

Bauer BG 24 H Rotary Drill ID: 172332

• Manufactured: 2007.
• Hours: 10,200.
• Reported in perfect working condition.
• Max. drilling diameter: 8.2 ft. (2500 mm)
• Max. drilling depth: 215.6 ft. (65.7 m).
• Torque: 204,304 lb/ft (277 kNm).
• Engine: CAT C9 - Tier III / CAT C9.3 - Tier IV.
• Power:
  • 375.3 HP @ 1850 rpm (280 kW @ 1850 U/min).
  • 399.5 HP @ 1850 rpm (298 kW @ 1850 U/min).
• Max. height: 78.4 ft. (23.9 m).
• Operating weight: 180,779 lbs (82.2t).

View more Rotary Drills

Pennsylvania 21x42 Jaw Crusher ID: 1124541

Pennsylvania 21x42 Jaw Crusher

• Mfg. Pennsylvania 
• Size: 21" x 42"
• Serial #: 5480
  
  
• Toggle: Double Toggle, Enclosed Flood Lubrication
• Liner Configuration: Smooth, With Diamond Cut Grooves
• Frame Style: Single Piece
• Max Feed: Approx. 16"
• Max/Min Discharge: 4"-1.5"
• Capacity Range: 85-220 TPH
  
  
• Drive: 40-60 HP (Not Included)
  
  
• Overall Dimensions:
  • Length: 9.5'
  • Width: 6.5'
  • Height: 8.25'
  • Weight: 31,000 Lbs.
    
    
• Additional Notes:
  
  • Unit Appears to be in Good Condition
    
    
• Location: USA

View More Jaw Crushers

Falcon SB750B Centrifugal Concentrator ID: 106841

• Falcon SB750B Concentrator.
  
  • Comes with:
    • Two stage rotor with rubber lined ductile iron stratification zone and replaceable rubber-lined stainless steel concentrate basket retention zone.
    • Heavy duty structural steel frame with:
      • Oversized shaft.
      • Sealed bearing cartridge.
      • Steel guarded herringbone belt drive.
    • Rubber lined tailings launder, removable domed lid, Ni-Hard impeller.
    • Central feed pipe, rinse manifold and inspection ports.
    • Fluidization piping including:
      • Water strainer.
      • Pressure compensated flow control valve.
      • Rotating union, pressure gauges and solenoid valves.
        • All plumbed and wired to machine mounted terminal box.
      • 10 hp Baldor TEFC electric motor.
  • SB750B AutoPAC.
    • comes with:
      • E1022 screen/keypad.
      • Mitsubishi PLC, VFD and dynamic brake.
      • Falcon standard control software capable of remote monitoring.
      • 100V control transformer, relays, selector switches, indicator lamps, circuit disconnect, circuit breaker, line contactor, line ractor.
        • In NEMA 3R panel.
• In New/Unused condition.

View more Centrifugal Gold Concentrators 

Denver 3 x 5 Ball Mill ID: 62898

• 3 ft. dia. x 5 ft. long.
• Steel lined.
• Self aligning babbit bearings.
• Straight cut gears
• Bull gear - 126 teeth.
• Pinion gear - 17 teeth.
• 20 hp belt drive motor to pinion shaft.
• Full gear and belt guards.
• Mounted to operating skid.
• Will fit into a standard shipping container.
• In excellent condition!

Lippmann 2436 Jaw Crusher ID: 150507

• Feed opening: 24 in. x 36 in. (61 cm x 91 cm).
• Serial no: 560631
  • Single-toggle jaw crusher.
  • Overhead eccentric shaft. 
  • Bearings.
  • 2 oversized manual flywheels.
    • 1 grooved.
    • 1 flat.
  • Manganese jaw plates.
  • Manual adjust.
  • Bare jaw.
• Electric motor can be supplied additionally.

Please contact us for more information.

Reliance Duty Master 40 HP Motor ID: 191868

• ID: 20MN320311 G 002.
• Volts 230/460V.
• RPM: 1765.
• Amps 102/51.
• Hz: 60.
• Phase: 3.

View more 40 HP Motors

30 LB Rail Frog & Switch Point. ID: 44234

30 LB Rail Frog & Switch Point.

Knelson CD20 Concentrators ID: 331356

The Centre Discharge (CD) Knelson batch concentrator historically has been the industry workhorse and most widely used centrifugal equipment for precious metal recovery. These CD20 models are being offered as manual discharge but they can be supplied with new ICS Jr. or ICS dual control systems on request.

• Model: KCCD20
• Size: 20 inch
• Year: 2007
• Manufacturer: FLSmidth Knelson 
• Maximum Feed Capacity: 80 tonnes/hr. solids
• Maximum Total Volumetric Throughput : 100m³/hr. (480USgpm)
• Feed Size
  • Maximum: 6mm
  • Recommended: 2mm
• Feed Density: 0 - 75% Solids by weight
• Minimum Air Flow Required (Auto Piling Only): 5.1m³/hr (3ft³/min) @ 600kPa (90psi)
• Concentrator Installation Weight: 900kg (2000lbs)
• Motor: 5.5 - 7.5kW (7.8 - 10HP) Electric
• Cone Style: G5
• Fluidization:
  • 8 - 11 Cubic Meters Per Hour
  • 35 - 47 US GPM
• Concentrate Weight: 
  • 9 - 11 kg
  • 19 - 25 lbs
• G-Force: 60
• Location: British Columbia, Canada

View more Centrifugal Gold Concentrators

Hydraulic Hoe Pack ID: 1425659

Hydraulic Hoe Pack

• Type: Hydraulic
• Condition: Used Condition
• Base Plate: 30in Long x 24in Wide
• Pin Dimensions: 16in Long x 1.5in Diameter
• Pinhole Spacing: 
  • First Set: 10.5in Center
  • Second Set: 14in Center
• Quick Connect Hydraulic Connections

• Overall Dimensions:
  • Length: 30in
  • Width: 24in
  • Height: 30in

• Location: Savona, British Columbia, Canada

View More Excavator Attachments

Rentech Boiler Economizer ID: 164010

• Gas side designed for 304,613 lbs/hr @ 425°F.
• Steam side designed for 105,263 lbs/hr @ 172 psig.
• 2 in. tubes.
• 120 in. m.w.
• SA178A material.
• Tube arrangement.
• Inline 12 streams.
• 1 inlet & outlet.
• MAWP 250 psi @ 500°F (700°F tubes).

• Dimensions (L x W x H):
  • 14 ft. x 16 ft. x 6.3 ft.
  • 4.27 m x 4.88 m x 1.92 m.
• Weight (dry):
  • 53,000 lbs / 24,040 kg.

View our full inventory of Boilers

20 in Trommel ID: 102518

• Up to 20 yards per hour.
• 3/8 in. thick barrel wall.
  • 3 ft. scrub section.
  • 2 ft. recovery section.
    • ¾ in. mesh screen.
• Hydraulic driven by Yanmar diesel engine.
• All steel structure.
  • 3/16 in. HSS box tubing.
  • Main trailer frame 6 in. x 2 in. x ¼ in. 'C' channel custom bent.
• Sluice Box 12 in. top 16 in. bottom x 7¾ ft. long.
  • Can function from either side of plant.
• 3 in. water intake.
  • accessed from either side of plant.
  • Minimum 165 gpm.
• ¼ in. thick hopper.
  • Heavy gussets - 48 in. wide x 64 in. long.
• Pintle hitch with surge brakes.
• 16 in. tires.
• Steady jacks in back.
• Storage box in front. 

Vecoplan RG-32 Shredder ID: 1425586

Vecoplan RG-32 Shreddder

• Make: Vecoplan
• Model: RG-32
• Year: 2003
• Condition: Used Condition
• Feed Opening: 32in x 40in
• Rotor:
  • Rotor Diameter: 9in
  • Number of Rotor Knives: 20
  • Rotor Rotation Speed: 115RPM
• Drive: Electric Motor
  • Power Output: 20 HP
  • Voltage: 460 Volts
  • Frequency: 60Hz
• Weight: 3,400lbs
• Includes Control Panel

• Location: Eastern Canada

View More Industrial Shredders