Wanted EquipmentSell Your Equipment Financing Now Available
Sell Your Equipment
Please provide us with as much detail as possible and we will get back to you.
INFORMATION REQUESTED:
Please include all available information such as Year, Make, Model, Condition, Location and Asking Price.
2008 Boart Longyear DB430 Rotary Drill ID: 1206373
2008 Boart Longyear DB430 Rotary Drill
- Make: Boart Longyear
- Model: DB 430
- Type: Rotary Drill
- Hours: 220
- Compressor: None
- Engine: Deutz 4 Cylinder
- Mud Pump: Moyno 3L6 (New 2018, 16' Stroke, Mast is 20')
- Mounted On: Tracks
- Tools/Options: Rotary/Coring Head has been Upgraded to a LF540
- Deck Engine is a 140 HP, 4.7 Liter
- Wireline Winch & a Pullmaster Winch
- Hydraulic Rod Rack with 400' of 2-3/8" API Drill Rod
- Dual Rod Clamps
- Breakout Wrench
- Specifications:
- Standard Drilling Systems
- 4" - 6.5": 300m (985ft)
- 4" - 6.5": 300m (985ft)
- PRIME MOVER:
- Standard Unit: DEUTZ BF4M1013EC Diesel Engine
- Power (maximum): 104kW@ 2200 RPM (140HP @ 2200 RPM)
- Tank Capacity: 230 L (60 Gallons)
- Fuel Consumption: 195 Gal/kWh
- Electrical Circuit: 24 Volt
- NOTE: The engine has sufficient power to run the rig up to 2500 meters above sea level at 25 °C
- ROTARY HEAD DB430 - TORQUE ANO RPM RATINGS
- Low Gear: 4,600/75 Nm/rpm (33,501/75 lb-ft/rpm)
- High Gear: 2,300/150 Nm/rpm (1,675/150 lb-ft/rpm)
- Bore - Inside Diameter: 52mm (2in)
- Swivel - Inside Diameter: 24mm (1in)
- Rotation Motors: Danfoss OMT 160
- Top Drive Flange: 2 3/8 API Reg Box
- Gear Ratio: 4.047:1
- Distance from Drilling Line to Chain: 202mm (7.95in)
- HYDRAULIC SYSTEM
- Pump: Variable Load-Sensing with Torque Control
- Max Flow: 230 Lpm (60GPM)
- Max Pressure: 280 bar (4,060 PSI)
- Hydraulic Oil Volume: 160 L (42 Gal)
- Oil Cooler Capacity: 16kW (21.4HP)
- DRILL MAST AND FEED SYSTEM
- Feed Stroke: 4,000mm (13ft)
- Feed Speed - Down: 3.9m/min (12.7ft/min)
- Feed Pressure Control: +/- 350 N (+/- 78 lbf)
- Fast Feed Speed
- Up: 40m/min (130 ft/min)
- Down: 66m/min (215 ft/min)
- Pull Down Force: 35kN (7,715 lbf)
- Pull Back Force: 70kN (15,400 lbf)
- MAIN WINCH (Mast Top)
- Pull on Inner Layer(Maximum): 9kN (1,980 lbf)
- Line Speed: 35m/min (115ft/min)
- Cable Diameter: 8mm (5/16in)
- ROD CLAMPS
- Maximum Diameter: 220mm (8.7in)
- Clamping Sizes: 65 to 95mm sf (2.5in to 3.75in sf)
- Maximum Holding Force: 10kN (22,500 lbf)
- Break-Out-Cylinder
- Max Pull: 80kN (17,984 lbf)
- Max Push: 115kN (25,853 lbf)
- Break-Out-Tong
- Min. Rod Size: 66.6mm (2 5/8in)
- Max. Rod Size: 81.2mm (3 1/5in)
- ROD RACK:
- Capacity - 3" Rods: 60
- Capacity - 3 1/2" Rods: 45
- UNDERCARRIAGE:
- Driving Speed:
- Low Gear: 2.5 km/h (1.55 mph)
- High Gear: 4.8 km/h (2.98 mph)
- Maximum Grade Ability (Low Gear): 60% (~30° Deg)
- Rubber Tracks: Standard
- Driving Speed:
- Standard Drilling Systems
- Location: Western USA
View More Rotary Drills