Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Casagrande C14 Anchor Drill ID: 173662
- Year: 2007.
- Operating hours: 2,500.
- 16 m stroke.
- Undercarriage with fixed tracks driven by hydraulic motors coupled to planetary reduction gears.
- Upper structure mounted on a ring gear allowing 360° rotation.
- Soundproofed power pack with Deutz TCD 2013 LO6, water cooled, turbocharged diesel engine.
- Four hydraulic stabilizers.
- (2) front hydraulically rotating.
- (2) rear fixed.
- Control panel complete with all controls of the rig and mounted on a mobile arm for good all around operator visibility.
- High tensile steel mast (18500 mm / 60.75 ft.) long allowing 16000 mm (52.5 ft) stroke of the rotary head.
- Rotary head type T2500 with offhole slide.
- (2) variable displacement motors.
- Blocking and break-out clamps type M5-MSS.
- A2 type hydraulic service winch.
- Line pull: 20 kN.
- Hydraulic pre-configuration for Gamma 200 type water pump.
View more Rotary Drills
American OVP4-10-21A Blower ID: 168146
- Model: OVP4-10-21A.
- 1900 CFM @ 26 in. SP.
- Static pressure: 26.
- 10 in. diameter inlet.
- 5¼ in² outlet.
- Welded steel wheel for material handling applications.
- 15 hp induction motor.
- Poles: 2.
- 230/460V.
- 3 phase.
- 60 Hz.
- 3520 rpm.
- Frame: 254T.
View more Centrifugal Blowers
Roots 418JH RCS Rotary Lobe Blower ID: 171063
- Series: 6000.
- Model: 418JH RCS.
- 6 in. diameter flanged inlet & outlet.
- Weight: 500 lbs / 227 kg.
Please contact us for more information
View more Positive Displacement Blowers
Greenheck 12000 CFM Fan ID: 207533
- Model: 33-CSW-10-CCW-BH-1-A75.
- Baldor-Reliance 7.5 HP Motor:
- 1770 rpm.
- 575 Volts, 3-phase.
- 6 amps.
- 12000 cfm.
- Static pressure: 2.
- 814 fan rpm.
View more Centrifugal Blowers
Aerovent Model 20 Upblast Blower ID: 190760
- Model: 20 CL-SD.
- Type: MH-AW-SW.
- Serial No.: 04-361540-2-2.
- 3 HP Motor:
- Volts: 230-460V.
- Hz: 60.
View more Centrifugal Blowers
Dresser Roots Whispair 1422RAS-J Blower ID: 181212
- Frame size: 1422J.
- Speed size: 1300.
- PSI ratings: 4-12.
- 7357-6985 CFM.
- BHP: 165-427.
- Blower is reported in excellent condition.
View more Positive Displacement Blowers
Knelson KC CD20 Centrifugal Gravity Concentrator ID: 74729
- Includes ICS Jr. automation package.
- Maximum feed capacity - 80 tonnes/hr solids.
- Maximum total volumetric throughput - 110m³/hr (480 US gpm).
- Feed size - Maximum: 6mm; Recommended: 2mm.
- Feed density - 0 - 75% solids by weight.
- Minimum air flow required (Auto piping only) - 5.1 m³/hr (3 ft³/min) @ 600 kPa (90psi).
- Concentrator installation weight - 900 kg (2000 lbs).
- 5.5-7.5 kW (7.5-10 hp) electric motor.
- Manual available.
- Very good overall condition.
View more Centrifugal Gold Concentrators
Devilbiss 5 HP Air Compressor ID: 295834
- Model: QAPV-5051
- 5 HP
- 22.40 cfm
- 175 psi
- 208-230/460 Volts
- 3-phase
- Location: Western Canada
View more Stationary Compressors
Perkins 640 kW 400 Volt Diesel Generator ID: 967970
- Voltage: 400 Volt
- Hours: 190
- Perkins Engine Model: 4006-23TAG2A
- Leroy Somer Alternator: Model: LL7024L
- 1500 RPM
- 50 Hz
- Skid Mounted
- Radiator Cooled
- Base Fuel Tank
- Mounted Control Panel
- Water Jacket Heater
- Fitted in a 20 ft. Acoustic Container
- Location: Europe
View more Generators
Ingersoll-Rand T3W Drill Rig ID: 197700
- CAT 3406 Diesel Deck Engine.
- IR HR2 900 cfm / 350 psi Air Compressor.
- Hammer Lubricator.
- Bean water injection pump (4 piston).
- 18,000 LBS Winch .
- 400 ft. of (4-1/2” x 20’ 2-7/8 IF) drill pipe & basic tooling included.
- Pipe Rack.
- Hydraulic leveling jacks.
- Mounted on 1998 International 2600 Truck.
- VIN# 1HTGLATT8XH631062.
- 33,148 miles.
- Caterpillar C-10 diesel engine - rated 350 HP.
- Jake brakes.
- 10 Speed Spicer Transmission.
- Power divider.
- Tires (90%+- Very Good Condition).
- 7885 hours.
View more Rotary Drills
Gardner Denver 215 CFM Air Compressor ID: 223881
- 50 HP.
- Max Pressure: 105 psig.
- 215 cfm.
- Hours: 29,398.
- 460 Volts, 3-phase.
- Year: 1984.
- Location: Western, Canada.
- Contact for more information.
View more Stationary Compressors
Gardner Denver 500 hp Blower ID: 82349
- 14 in. x 14 in.
- 500 hp electric motor.
- 7 stage.
- High pressure unit.
Manufacturer: | GARDNER-DENVER |
Kubota 12.6 kW Diesel Generator ID: 98240
- 110/220V single phase.
- 230/460V three phase.
- 3 cylinder diesel.
- Includes safety shut downs.
- 1,431.9 hours since new.
- Control panel and main breaker.
Manufacturer: | Kubota |
Alfa Laval MAPX 313 Centrifuge ID: 172013
- Fully automatic.
- Stainless steel bowl.
- Aluminum body.
- Self cleaning machine.
- Rated capacity on glycerin removal from biodiesel.: 50 GPM.
- New 40 HP motor.
- 575V.
- 3 phase.
- 60 Hz.
- 575V.
- Teflon coated internal brass parts.
- Electrolysis nickel for protection.
- Control panel with touch screen.
- Includes water harness, bowl insertion/removal tools and manual.
View more Centrifuges
10 HP Allegheny Shredder ID: 274125
- Model: 16-150C
- Hours: 428
- Up to 1200lbs hr
- Location: Eastern USA
View more Shredders
42in. Vertical Baler ID: 250703
- 10" Cylinder
- 30HP
- 600volt
- Deep pen to within 10" of bottom
- Chamber: 44"w x 33"d x variable
- Location: Eastern Canada
View more Recycling Equipment
Roots Whispair 1216-JHRAS Rotary Lobe Blower ID: 171101
- Inlet volume: 2250 CFM.
- Inlet pressure: 8 in. mercury vacuum @ 843 rpm.
- 12 in. ID flanges.
- Reported to be in very good condition.
- Weight: 2,560 lbs / 1,161 kg.
Please contact us for more information
View more Positive Displacement Blowers