Placer Gold 22in Dia. x 9ft Trommel

• Custom designed by Placer Gold Miner.
• Size: 22in Dia. x 9ft Long
• Ultra heavy duty Design
• Capacity: 5-8 YPH 
• Water Connections: 4in & 3in water hookups
• New Coleman 1850 watt Gas Generator Mounted on Unit
• Drive: Dayton DC Electric Motor and Dayton 30:1 Gear Reducer (800 foot lbs. with #80 chain & sprockets) - AC to DC variable speed controller, variable trommel speed from 0-20 RPM.
• Hand adjustable hydraulic 4 ft. 6 in. x 7 ft. vibrating hopper with 1/4 in. steel bed and grizzly at 3 1/2 in. 
  • Oli vibrator on hopper (double the size recommended by Oli manufactured for maximum classification).
• All 6 wheels have permanent lubed bearings and are rated 1400 lbs. each.
• Three adjustable brass valves with three 1 1/2 in. galvanized pipes to hopper.
• One adjustable 2 in. brass valve with 2 in. galvanized pipe to interior of trommel.
• 2 brass valves for clean-up hoses (1 on each side).
• All chutes and sluices dump both directions, double bottoms at top of both sluices.
• Chutes and sluices travel mounted on trommel
• Classifies 1/2 in. minus to 26 in. x 10 ft. sluice (designed for fine gold)
• Classifies 1 in. minus to 16 in. x 10 ft. sluice
• Classifier screen is 1/8 in. thick
• Nugget trap at end of trommel barrel and nugget riffles on discharge chute as an optional trap
• Electrical panel with two 15 amp breakers
• Unit skid mounted with optional corner brackets to mount jacks
• Approximate weight is 2800-3200 lbs.
• All moving parts are painted hazard yellow
• Unit is designed to last and not have "in the field" breakdowns and problems
  • Add matting and expanded metal of your choice and go to work
• 300 GPM minimum pump is recommended and not supplied