Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
60 in Trommel Wash Plant ID: 174313
- Built new in 2016.
- 27 HP Isuzu engine.
- Includes hydraulic pack.
- Oil cooler.
- Flow control.
- Forward and reverse directions.
- 45 gallon hydraulic and diesel fuel tanks.
- Twin 4 ft. x 10 ft. sluice boxes with carpet.
- Adjustable feed hopper.
- 8 in. manifold water intake.
- Twin 2 in. spray bars.
View more Trommels.
General Kinetics Vibrating Feeder ID: 231993
- Type: Parament II
- Model: 48 x 10 x 10
- 48" x 120" Table
- Location: Eastern USA
View more Vibarting Feeders
Cedarapids 18 in. x 24 in. Jaw Crusher ID: 526214
- Shop Number: 15544
- Roller Bearing
- Single Toggle
- Corrugated Jaw Liners
- Location: Eastern Canada
View more Jaw Crushers
3 ft x 14 ft Trommel Wash Plant ID: 159168
- 3 ft. diameter.
- 14 ft. long.
- 4 lifters - 2 in. high.
- Screen section:
- 32 in. long.
- 3/8 in. punch plate.
- 1 ft. long center section - 1 in. holes.
- 10 hp motor.
- 230/460V.
- Includes gearbox.
- Feed hopper (L x W x H): 6 ft. x 4 ft. x 3 ft.
- 1 in. water lines into hopper.
- Mounted on tandem axle trailer.
- Overall dimensions (L x W x H):
- 26 ft. x 6 ft. x 7.5 ft.
- 7.92 m x 1.83 m x 2.29 m.
- Overall dimensions (L x W x H):
- Sluice box (L x W x H): 20 ft. x 20 in. x 10 in.
- 3 sets of adjustable height legs.
Please contact us for more information.
View our full inventory of Trommels
Nelmor 4848 Slow Speed Shredder ID: 199449
- Model Number: 4848S.
- Hopper opening: 9 ft. x 9 ft. (approx.).
- Serial Number: 87-10-26101.
- 2 x 50 hp electric motors.
- Voltage: 575.
- Phase: 3.
- Very good condition,seen very little use.
- Infeed system also available separately.
View more Shredders
2 Silo Package, 300 tons of Storage ID: 338116
- 1 - 140 Ton Silo
- 1 - 160 Ton Silo
- Stationary
- Electric Heated Cones
- Insulated
- Double Gate Cones
- Air Tank
- 90ft. - 30in. Slats with
- 75 HP Motor
- Single Chain
- Transfer Slat with
- 25 HP Motor
- Walkway
- Location: Southern USA
View more Silos
SSI Dual Shaft Shredder ID: 298877
- Model: 1000-E
- 50 HP
- Mfg: 2003
- Stainless Steel
- Ram on Hopper to Force Feed Shredder
- Wash Line System
- Shaker
- Location: Eastern USA
View more Shredders
60HP Staiger Machinery Shredder ID: 1398453
60HP Staiger Machinery Shredder
- Make: Staiger Machinery Inc.
- Year: 2000
- Type: Industrial Shredder
- Serial: 200521
- Condition: Used, Reported in Good Condition - 6 Knives Need Replacing
- Previous Use: Shredding Plastic
- Shredding Area: 48in x 44in Interior
- Knives: 48 Knives
- 54in x 50in Exterior
- Drive: Toshiba Electric Motor
- Power Output: 60HP
- Speed: 1800 RPM
- Voltage: 575 Volts
- Frequency: 60Hz
- Includes Control Panel
- Location: Eastern Canada
View More Industrial Shredders
4 in. Galligher sump pumps x 72 in. depth(Can be converted to a 6 in.) ID: 45222
4 in. Galligher sump pumps x 72 in. depth(Can be converted to a 6 in.)
2012 Epiroc Atlas Copco Simba S7D Long-hole Production Drill Rig ID: 582495
- Approx. 2000 Hrs.
- 55 HP Diesel
- 75 HP Electric
- 440 Volt, 50 Hz.
- Gross Weight 13,500 kg.
- Location: Central America
View more Jumbo Drills
Vecoplan Rotary Waste Shredder ID: 331852
- Model: VAZ 120/105 (RG42)
- 30 HP
- 460 Volt
- 42in. x 48in. Feed Opening
- Hydraulic Ram
- 10in. Rotor
- Hopper
- Cart Dumper
- Location: Eastern Canada
View more Shredders
Consoildated DHW-2C Double Chamber Clothing Baler ID: 233094
- Model Number: DHW-2C
- MFG: 1996
- Chamber: 16" x 30" x 48"
- HP: 10
- 5" Cylinder
- Operating Pressure: 1,55.PSI
- Cycle Time: 19 Sec (No Load)
- Location: Eastern USA
View more Recycling Equipment
146 PSI Air Dryer ID: 971264
- Model: FD604
- Bar: 146 PSIG
- Max. Work Pressure: 10 Bar
- Voltage: 230 Volts
- Single Phase
- Location: Western Canada
View more Air Compressors
Leeson 5 HP Motor ID: 189727
- Model: N184T34FB2B.
- Volts: 208-230/460V.
- RPM: 3510.
- Cat. No.: G15029960.
- Frame: 184T.
View more 5 HP Motors