Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
2007 Atlas Copco Rocket Boomer 282 ID: 222499
- Hydraulically controlled mining and tunneling face drilling rig.
- Robust design allows for fast positioning, a high penetration rate, straight holes, superior durability and lower drill steel cost.
- Main components
- Rock drill: 2 x COP 1838ME.
- Feed: 2 x BMH 2800-series.
- Boom: 2 x BUT 28.
- Drilling system: DCS18-280.
- Carrier: DC 15.
- Two BUT 28 booms
- Feed extension: 1250 mm.
- Boom extension: 1250 mm.
- Deutz F5L 912W Diesel Engine
- 5 cylinder.
- 4 stroke pre-chamber.
- 75 HP.
- Electrical system
- Total installed power: 125 kW.
- Main motors: 2 x 55 kW.
- Hydraulic System
- Hydraulic pumps: 2 units consisting of one variable pump for percussion/positioning.
- Pumps unloaded at start.
- System pressure 150-230 bar.
- Air system
- Atlas copco LE55 compressor.
- Capacity, max 12.5 l/s at 7 bar.
- Air pressure gauge.
- Water system
- Water booster pump.
- Capacity, max 150 l/min at 13.5 bar boost.
- Min water inlet pressure 2 bar.
View more Jumbo Drills
Cedarapids 10 x 36 Jaw Crusher ID: 54740
- Size 10 x 36 feet opening.
- Roller Bearing Style.
- Corrugated jaw liners.
View more Jaw Crushers
Manufacturer: | CEDARAPIDS |
CECO 24 x 40 Frac Sand Conveyor ID: 58008
- 24 in. wide.
- 26 ft. long horizontal section.
- 14 ft. long angle discharge section.
- 4-5 ft. long grated feed troughs.
- 20 in. dia. head, tail, and snub pulleys.
- 371 Detroit diesel hydraulic drive.
- Mounted on sinlge axle chassis.
- 5th wheel hitch.
Blue M DC 336E Oven ID: 196234
- Model: DC 336E.
- Serial: U15H-391208-UH.
- Heater Capacity: 13.5 Kw.
- Line current (Amps/Phase): 40.
- Volts: 208V.
- Frequency: 60.
- Phase: 3.
- Outside dimensions:
- 81 in. tall.
- 40 in. wide.
- 29 in. depth of box (35 in. overall depth including handle and appendages off back).
- Inside oven dimensions:
- 25 in. wide.
- 20 1/4 in. deep
- 37 1/2 in. tall.
View more Laboratory Equipment
2012 Vecoplan Hurricane Shredder ID: 233126
- Dual Shaft Shredder
- Rotor Diameter: 20 28"
- Number Cutter: 2 x 12/18/24
- Rotor Speed: 90 RPM
- Motor Drive: 2 x 300 HP
- Weight: 28.5 Tons
- Electrical Requirements:
- 460 Volts
- 3 Phase
- Includes:
- Control Panel
- Cooler
- Owners Manual
- Spare Parts
- Location: Eastern USA
View more Recycling Equipment
Cummins 250 kW Natural Gas Generator ID: 409082
- 277/480 Volt
- 250 kW
- 1800 RPM
- 376 Amps
- 3 Phase
- 60 Hz
- 663 Hours
- Location: Eastern Canada
View more Natural Gas Generators
Isuzu 100 kW Diesel Generator ID: 139458
- Isuzu 100 kW Diesel Generator.
- Model: Whisperwatt DCA125.
- 480/208V.
- Hours: 21,821.
- Equipped with:
- Sound attenuated enclosure.
- Isuzu diesel engine.
- Model: 4HK.
- Voltage selector switch.
- Equipped with:
- Mounted on tandem axle trailer.
- Model: Whisperwatt DCA125.
Please contact us for more information.