DeepRock DR-150 Drill Rig ID: 197838

• American Manufacture 5x6 Duplex Mud Pump.
• Winch.
• Bean 10 GPM Water Injection.
• Hammer lubricator.
• Sliding head.
• Power Head (0 hours since rebuilt).
• 4 hydraulic leveling Jacks.
• No pipe.
• Mounted on a 2003 Ford F750 4X4.
• Cummins 5.9 Engine.

View more Rotary Drills

Progressive Industries Micro-Sizer Air Classifier ID: 572855

The MS-20 will do approx. 4 ton – 20 tons/hour.

• Model: MS-20
• 20hp Direct Drive Sizer/Classifier
  • Baldor Inverter Drive Motor
  • 230/460 Volt
  • 1750 rpm
• 46 in. Dia. Cyclone
• 36 in. Dia. Blower.
  • Belt driven by a 50hp, 3545 rpm Motor.
  • 208-230/460 Volt.
• 10 in. x 10 in. Rotary Valves on Material Feed, Classifier and Cyclone Discharges.
  • Chain Driven by Winsmith Gear-Head Motors.
  • Series 924
  • 1 hp
  • 230/460 Volt.
  • 1730 rpm
  • 30 – 1 Reducer Ratio
• Location: British Columbia, Canada

View more Classifiers and Sandscrews

Telsmith 25in x 36in Jaw Crusher ID: 1397583

Telsmith 25in x 36in Jaw Crusher

• Make: Telsmith
• Size: 25in x 36in
• Condition: Used, Reported in Good Condition
• Mounted on I-Beam Base 
• Max Feed: 22in
• Min/Max Discharge: 3.5in - 6in
• Max Capacity: 77-106 TPH (3.5in Discharge) to 134-183 TPH (6in Discharge)
  
  
• Overall Dimensions:
  • Length: 112in
  • Width: 90in
  • Height: 96in
  • Weight: 20,000 Lbs. (Approx.)
    
    
• Location: Northwest USA

View More Jaw Crushers

Stamco 3/8 in. Shear ID: 288189

• 600 Volts with
  • Air Assist
• 3/8 in. Cut
• Saftey Curtin Light 
• Location: Eastern Canada

View more Shredders

Caterpillar 600 kW 600 Volt Diesel Generator ID: 897757

• 600kW
• Caterpillar 3412DITA diesel engine
•  Stamford 850 KW oversize generator
• Voltage 600
  • 3 Phase
  • 60 Cycles
• With PMG
• Engine dyno-tested and has 12,000 hours
• New Dynagen 400 controller
• Circuit breaker,
• Muffler

Location Ontario

M.W. Watermark 24 in x 24 in Filter Press ID: 188963

• Model: FP630G32L-16/32-5/10ASC.
• Plate Dimensions: 24 in. x 24 in. (630 mm x 630 mm).
• Capacity Range: 2 Cubic Feet to 12 Cubic Feet.
• Max Feed Pressure: 100 PSI.
• Air Supply Pressure: 100 PSI.
• Hydraulic Clamping Pressure: 4500 PSI.
• Relieve Pressure: 4900 PSI.
• Standard Features:
  • High-Strength Carbon Steel Frame.
  • Blasted to SSPC-SP6.
  • Epoxy-Coated Framework.
  • 304 Stainless Steel Side Bar Wear Caps.
  • Schedule 80 PVC Piping Connections.
  • Four Corner Discharge Piping.
  • Caulked & Gasketed Recessed Polypropylene Plates.
• Quantity: 2

View more Plate Filters 

Bruno 560kW Diesel Generator ID: 1172951

Bruno 560kW Diesel Generator

• Make: Bruno
• Model/Size: GQ700V
• Year: 2013
• Size: 700kVA
• Portable/Stationary: Stationary
  
  
• Engine: Volvo TWD 1643GE (811HP@1500RPM)
  • Hours: 71.5 Hours
  • Oil: ACEA E2, API CD, CF, CF-4, CG-4, Capacity - 48 Liters
  • Radiator: Air to Air, Charge Air Cooled, Capacity - 128 Liters
    
    
• Generator: MECC ALTE ECO40-2L
  • kVA/kW: 
    • Prime: 504kW (630kVA)
    • Standby: 560kW (700kVA)
  • RPM: 1500 RPM
  • Voltage: 415/240V
  • Amperage: 877A
  • Frequency: 50Hz
  • Phase: 3-Phase
  • Output Panel: DeepSea Electronics Q7310AS
    
    
• Additional Information:
  
  • Condition: As New
  • Skid Mounted
  • Base Fuel Tank - 420L Capacity
  • Water Jacket Heater
  • Mounted Auto Start Control Panel
  • Fitted in an Acoustic Enclosure
    
    
• Overall Dimensions:
  • Length: 485cm
  • Width: 200cm
  • Height: 235cm
  • Weight: 6,000 Kg
    
    
• Location: Europe

View More 501-1000kW Diesel Generators