35,700 Gallon Steel Tank ID: 164853

• Dimensions: 13 ft. dia x 36 ft. high.
• Top: 6 in. inlet and 8 in. diameter vent.
  
  • Lifting eyes on perimeter.
• (2) 4 in. flanged fittings on side.
• 24 in. flanged manway at bottom.
• Capacity: 35,700 US gallon.
• Reported in excellent condition.

View more Steel Tanks

Used Eimco Filter Press. 48 in. x 48 in. 40 Plates & Frames. Model: M1200FB. ID: 44088

• Eimco Filter Press.
• Model: M1200FB.
• 48 in. x 48 in.
• 40 Plates & Frames.
• 150 PSI Filtreing Pressure.
• Max Thrust: 204 Tons.

Longyear 24C Diamond Core Drill ID: 1417669

Longyear 24C Diamond Core Drill

• Make: Longyear
• Model: 24C
• Type: Diamond Core Drill
• Duty: Medium Depth Drilling
• Condition: Used Condition
• Mast: 27ft 
• Drill Stem: 120ft
  
  
• General Model Specifications:
  • Power Unit: Deutz Diesel F2L 410
    • Power Output: 21HP
  • Transmission: Automotive Sliding Gear Type
    • Speeds: Three Forward
  • Drive I.D.: 1.8125in (46mm, 1-13/16")
  • Cylinder I.D.: 2.5in (64mm, 2-1/2")
  • Length of Feed: 24in (610mm)
  • Angle Range: 360°
  • Depth Capacities:
    • AQ Wireline Rod: 720ft (220m)
    • EW Rod: 890ft (270m)
    • AW Rod: 675ft (205m)
  • Drum Hoist:
    • Drum Diameter: 5.5in (140mm) 
    • Width: 2.75in (70mm)
    • Capacity: 65ft (19.7m) With 5/16in Cable
      
      
• Location: Northwest USA

View More Diamond Core Drills

Liberty 2HP Submersible Pump ID: 1302138

Liberty 2HP Submersible Pump

• Make: Liberty
• Model: LSG202A
• Type: Automatic
• Style: Sewage Grinder Pump
• V-Slice Technology
• Flow Rate: 30 GPM @ 80ft Head
• Power Output: 2HP
• Voltage: 208-230 Volt
• Current: 15 Amps
• Phase: Single
• 2in Quick-Couple Hose Connector on Outlet
  
  View Spec Sheet Below
  
  
• Location: Savona, British Columbia, Canada

View More Submersible Pumps

2012 CAT D10T Dozer ID: 1192307

2012 CAT D10T Dozer

Quantity: 3 Units

• Make: Caterpillar
• Model: D10T
• Year: 2012
• Condition: Used
• Hours: 3 Units
  • Unit 1 (No.25): 8,849 Hours
  • Unit 2 (No.26): 8,581 Hours
  • Unit 3 (No.27): 9,755 Hours
• One Owner
• Single Shank Ripper
• Enclosed ROPS Cab
• Undercarriage near 100% Life
• New Chains and Rollers 
  
  
• Blade: Standard Blade
  • Width: 15.9ft
  • Height: 81in
  • Capacity: 24.2yd³
  • Cutting Depth: 26.5in
  • Ground Clearance: 58.9in (1497mm)
  • Maximum Tilt: 39.1in (993mm)
    
    
• Engine: Cat C27 ACERT 
  • Gross Power: 646HP (482kW)
  • Number Of Cylinders: 12
  • Displacement: 1647.5in³
  • Aspiration: Turbocharged
    
    
• Transmission
  • Transmission Type: Powershift
  • Number Of Forward Gears: 3
  • Number Of Reverse Gears: 3
  • Max Speed - Forward: 7.9mph
  • Max Speed - Reverse: 9.8mph
    
    
• Undercarriage
  • Shoe Type: Extreme Service
  • Width of Shoe: 610mm (24in)
  • Shoes/Side: 44
  • Grouser Height: 93mm (3.7in)
  • Pitch: 260mm (10.2in)
  • Ground Clearance: 615mm (24.2in)
  • Track Gauge: 2550mm (100.4in)
  • Length of Track on Ground: 3885mm (12ft 9in)
  • Ground Contact Area: 4.7m² (7,326in²)
  • Track Rollers/Side: 8
    
    
• Hydraulic System
  • Pump Type: Gear Driven
  • Relief Valve Pressure: 2725 PSI
  • Pump Flow Capacity: 107 Gal/Min
    
    
• Operational
  • Operating Weight: 146,500lbs
  • Fuel Capacity: 318 Gal
  • Cooling System Fluid Capacity: 34.9 Gal
  • Engine Oil Capacity: 18 Gal
  • Hydraulic Fluid Capacity: 38 Gal
  • Powertrain Fluid Capacity: 51 Gal
  • Final Drives Fluid Capacity: 6 Gal
  • Operating Voltage: 24 Volt
  • Alternator Supplied Amperage: 95 Amps
    
    
• Location: South America

View More Dozers

Cumberland 12 x 16 Grinder ID: 170348

• 12 in. x 16 in.
• Baldor 10 HP motor.
  • 208-230/460V.
  • 1750 rpm.
  • Frame: 215T.
• Stainless steel wear parts.
• 3/8 in. holes in screen.

View more Recycling & Grinding Machines

Ameri-Shred AMS-1000 Industrial Shredder ID: 974533

• Model: AMS-1000
• Horsepower: 10 
• Voltage: 230 Volt 
• 3 Phase 
• Comes with 
  • Hydraulic Lift Table 
• Location: Eastern USA

View more Shredders