2007 Atlas Copco Rocket Boomer 282 ID: 222499

• Hydraulically controlled mining and tunneling face drilling rig.
• Robust design allows for fast positioning, a high penetration rate, straight holes, superior durability and lower drill steel cost.
• Main components
  • Rock drill: 2 x COP 1838ME.
  • Feed: 2 x BMH 2800-series.
  • Boom: 2 x BUT 28.
  • Drilling system: DCS18-280.
  • Carrier: DC 15.
• Two BUT 28 booms
  • Feed extension: 1250 mm.
  • Boom extension: 1250 mm.
• Deutz F5L 912W Diesel Engine
  • 5 cylinder.
  • 4 stroke pre-chamber.
  • 75 HP.
• Electrical system
  • Total installed power: 125 kW.
  • Main motors: 2 x 55 kW.
• Hydraulic System
  • Hydraulic pumps: 2 units consisting of one variable pump for percussion/positioning.
  • Pumps unloaded at start.
  • System pressure 150-230 bar.
• Air system
  • Atlas copco LE55 compressor.
  • Capacity, max 12.5 l/s at 7 bar.
  • Air pressure gauge.
• Water system
  • Water booster pump.
  • Capacity, max 150 l/min at 13.5 bar boost.
  • Min water inlet pressure 2 bar.

 View more Jumbo Drills

Cedarapids 10 x 36 Jaw Crusher ID: 54740

• Size 10 x 36 feet opening.
• Roller Bearing Style.
• Corrugated jaw liners.

View more Jaw Crushers 

CECO 24 x 40 Frac Sand Conveyor ID: 58008

• 24 in. wide.
• 26 ft. long horizontal section.
• 14 ft. long angle discharge section.
• 4-5 ft. long grated feed troughs.
• 20 in. dia. head, tail, and snub pulleys.
• 371 Detroit diesel hydraulic drive.
• Mounted on sinlge axle chassis.
• 5th wheel hitch.

Blue M DC 336E Oven ID: 196234

• Model: DC 336E.
• Serial: U15H-391208-UH.
• Heater Capacity: 13.5 Kw.
• Line current (Amps/Phase): 40.
• Volts: 208V.
• Frequency: 60.
• Phase: 3. 
• Outside dimensions:
  • 81 in. tall.
  • 40 in. wide.
  • 29 in. depth of box (35 in. overall depth including handle and appendages off back).
• Inside oven dimensions:
  • 25 in. wide.
  • 20 1/4 in. deep 
  • 37 1/2 in. tall.

View more Laboratory Equipment 

2012 Vecoplan Hurricane Shredder ID: 233126

• Dual Shaft Shredder
• Rotor Diameter: 20 28"
• Number Cutter: 2 x 12/18/24
• Rotor Speed: 90 RPM
• Motor Drive: 2 x 300 HP
• Weight: 28.5 Tons
• Electrical Requirements: 
  • 460 Volts
  • 3 Phase
• Includes:
  • Control Panel
  • Cooler
  • Owners Manual
  • Spare Parts
• Location: Eastern USA

View more Recycling Equipment 

Cummins 250 kW Natural Gas Generator ID: 409082

• 277/480 Volt
• 250 kW
• 1800 RPM
• 376 Amps
• 3 Phase
• 60 Hz
• 663 Hours
• Location: Eastern Canada

View more Natural Gas Generators

Isuzu 100 kW Diesel Generator ID: 139458

• Isuzu 100 kW Diesel Generator.
  • Model: Whisperwatt DCA125.
    • 480/208V.
  • Hours: 21,821.
    • Equipped with:
      • Sound attenuated enclosure.
      • Isuzu diesel engine.
        • Model: 4HK.
      • Voltage selector switch.
  • Mounted on tandem axle trailer.

Please contact us for more information.

Allis Chalmers 8 x 20-2 Incline Screen ID: 181007

• 8 ft. wide.
• 20 ft. long.
• Double deck.

• Please contact for more information.

• View more Incline Screens available