DeepRock DR-150 Drill Rig ID: 197838

• American Manufacture 5x6 Duplex Mud Pump.
• Winch.
• Bean 10 GPM Water Injection.
• Hammer lubricator.
• Sliding head.
• Power Head (0 hours since rebuilt).
• 4 hydraulic leveling Jacks.
• No pipe.
• Mounted on a 2003 Ford F750 4X4.
• Cummins 5.9 Engine.

View more Rotary Drills

Progressive Industries Micro-Sizer Air Classifier ID: 572855

The MS-20 will do approx. 4 ton – 20 tons/hour.

• Model: MS-20
• 20hp Direct Drive Sizer/Classifier
  • Baldor Inverter Drive Motor
  • 230/460 Volt
  • 1750 rpm
• 46 in. Dia. Cyclone
• 36 in. Dia. Blower.
  • Belt driven by a 50hp, 3545 rpm Motor.
  • 208-230/460 Volt.
• 10 in. x 10 in. Rotary Valves on Material Feed, Classifier and Cyclone Discharges.
  • Chain Driven by Winsmith Gear-Head Motors.
  • Series 924
  • 1 hp
  • 230/460 Volt.
  • 1730 rpm
  • 30 – 1 Reducer Ratio
• Location: British Columbia, Canada

View more Classifiers and Sandscrews

Telsmith 25in x 36in Jaw Crusher ID: 1397583

Telsmith 25in x 36in Jaw Crusher

• Make: Telsmith
• Size: 25in x 36in
• Condition: Used, Reported in Good Condition
• Mounted on I-Beam Base 
• Max Feed: 22in
• Min/Max Discharge: 3.5in - 6in
• Max Capacity: 77-106 TPH (3.5in Discharge) to 134-183 TPH (6in Discharge)
  
  
• Overall Dimensions:
  • Length: 112in
  • Width: 90in
  • Height: 96in
  • Weight: 20,000 Lbs. (Approx.)
    
    
• Location: Northwest USA

View More Jaw Crushers

Stamco 3/8 in. Shear ID: 288189

• 600 Volts with
  • Air Assist
• 3/8 in. Cut
• Saftey Curtin Light 
• Location: Eastern Canada

View more Shredders

Caterpillar 600 kW 600 Volt Diesel Generator ID: 897757

• 600kW
• Caterpillar 3412DITA diesel engine
•  Stamford 850 KW oversize generator
• Voltage 600
  • 3 Phase
  • 60 Cycles
• With PMG
• Engine dyno-tested and has 12,000 hours
• New Dynagen 400 controller
• Circuit breaker,
• Muffler

Location Ontario

M.W. Watermark 24 in x 24 in Filter Press ID: 188963

• Model: FP630G32L-16/32-5/10ASC.
• Plate Dimensions: 24 in. x 24 in. (630 mm x 630 mm).
• Capacity Range: 2 Cubic Feet to 12 Cubic Feet.
• Max Feed Pressure: 100 PSI.
• Air Supply Pressure: 100 PSI.
• Hydraulic Clamping Pressure: 4500 PSI.
• Relieve Pressure: 4900 PSI.
• Standard Features:
  • High-Strength Carbon Steel Frame.
  • Blasted to SSPC-SP6.
  • Epoxy-Coated Framework.
  • 304 Stainless Steel Side Bar Wear Caps.
  • Schedule 80 PVC Piping Connections.
  • Four Corner Discharge Piping.
  • Caulked & Gasketed Recessed Polypropylene Plates.
• Quantity: 2

View more Plate Filters 

Bruno 560kW Diesel Generator ID: 1172951

Bruno 560kW Diesel Generator

• Make: Bruno
• Model/Size: GQ700V
• Year: 2013
• Size: 700kVA
• Portable/Stationary: Stationary
  
  
• Engine: Volvo TWD 1643GE (811HP@1500RPM)
  • Hours: 71.5 Hours
  • Oil: ACEA E2, API CD, CF, CF-4, CG-4, Capacity - 48 Liters
  • Radiator: Air to Air, Charge Air Cooled, Capacity - 128 Liters
    
    
• Generator: MECC ALTE ECO40-2L
  • kVA/kW: 
    • Prime: 504kW (630kVA)
    • Standby: 560kW (700kVA)
  • RPM: 1500 RPM
  • Voltage: 415/240V
  • Amperage: 877A
  • Frequency: 50Hz
  • Phase: 3-Phase
  • Output Panel: DeepSea Electronics Q7310AS
    
    
• Additional Information:
  
  • Condition: As New
  • Skid Mounted
  • Base Fuel Tank - 420L Capacity
  • Water Jacket Heater
  • Mounted Auto Start Control Panel
  • Fitted in an Acoustic Enclosure
    
    
• Overall Dimensions:
  • Length: 485cm
  • Width: 200cm
  • Height: 235cm
  • Weight: 6,000 Kg
    
    
• Location: Europe

View More 501-1000kW Diesel Generators

Stamford 25 kW Natural Gas Generator ID: 290070

• 25 kW
• 120/240 Volts
• Single Phase
• GM3.0 1800 RPM Engine
• Auto-Start Controls
• Block Heater
• 4200 Hours
• Reconnectable for 30 kW 3 Phase
• Circuit Breaker 
• Flew Mounted 

View more Natural Gas Generator

3 ft. x 4 ft. x 3 ft. Deep Steel Collection Bin. ID: 43454

• 3’ X 4’ X 36” Deep Collection Bin
• Steel Construction
• Plywood Cover With Angle Iron Support Frame
• 8” Dia. Center Feed Opening
• Tapered Bottom
• Manual Gear Operated Slide Chute
• 12” X 8” Discharge
• Mounted On 5” Caster Wheels
• With Angle Iron Corner Support Legs

Sullair DE-18 Stationary Air Compressor ID: 570990

• Model: DE-18
• Rated Capacity
  • 1550 CFM @ 125 PSIG
  • 732 L/S @ 8.6 Bar
• Max Pressure 
  • 150 PSIG 10.3 Bar
• Rated Engine RPM: 1840
• 100% Oil Free
• Location: Eastern Canada

View more Stationary Air Compressors

CE Double Mitre Saw ID: 668769

• Model: Prisma Maxi 
• Voltage: 220 Volts
• Single Phase
• Location: Western Canada

View more Machine Shop Tools

Mettler Toledo PL 202-S Laboratory Balance ID: 373122

• Model: PL 202-S
• Max Weight: 210 grams, d = 0.01 grams Repeatable (Std. Dev.) = 0.008 mg.
• Light Weight Portable Balance that works on 4 Standard AA Batteries or a Wall Wart Type Plug in Power-Supply Rated at 12 Volt dc @ 500 ma
• Units Measured Include
  • G.
  • Kg.
  • Mg.
  • Ct.
  • Lbs.
  • Oz.
  • Ozt.
  • GN.
  • Dwt Momme
• Dimensions: 19.4 cm wide x 22.5 cm deep x 6.7 cm high
• Weight: 3 1/2 lbs
• Location: Western USA

View more Laboratory Equipment

Swan SVU 205 Air Compressor ID: 207448

• Model: SVU 205.
• 15 CFM, 3-phase.
• 200 psi.
• Year: 2005.
• S/N: 1361878.
• Baldor Reliance 7.5 HP Motor:
  • 230/460 volts.
  • Amps: 19.4/9.7.
  • RPM: 1770.
  • Frame: 213T.

View more Stationary Air Compressors

Kepes 8 in x 8 ft Channel Conveyor ID: 165827

• Model: 8-8D.
• 8 in. wide.
• 8 ft. long.
• Baldor ¼ HP motor.
  • 1150 rpm.
  • Frame: 56C.

Please contact us for more information. 

View more Channel Conveyors

CAT 728 kW 400 Volt Diesel Generator ID: 959650

• Voltage: 400 Volt 
• Hours: 30,000
• Caterpillar Engine 
  • Model: 3508
• CAT SR4 B Alternator 
• 50 Hz
• 1500 RPM 
• Skid Mounted 
• Radiator Cooled 
• Mounted Control Panel
• Location: Europe

View more Generators

ROOTS RCS-J Frame 821 Blower ID: 187458

• Flow Range: to 3815 CFM
• Max Δ Pressure: 15 psi
• Max Δ Vacuum: 16" Hg
• Maximum RPM: 2250
• Minimum RPM: 477
• Max ΔT: 230˚F
• Inlet Connection: 12”
• Discharge Connection: 10”
• Shaft Dia.: 2.75”
• Drive End Lubrication: Oil
• Gear End Lubrication: Oil
• Required Oil for Horizontal Unit: 256 ounces Gear End
• Required Oil for Horizontal Unit: 120 ounces Drive End
• Required Oil for Vertical Unit: 144 ounces Gear End
• Required Oil for Vertical Unit: 80 ounces Drive End
• Unit Weight: 1800 pounds (818 kg)
• Max ΔT: 260˚F with Oil Cooler

View more Blowers 

Tsurumi 15 hp Submersible Pump ID: 122401

• Tsurumi 15 hp Submersible Pump.
  • Model: LH311W-60.
    • 3 inch discharge.
    • 600V.
    • 3 phase.

Please contact us for more information.

HQ Casing Shoe ID: 697051

• Qty: 22
• Location: British Columbia, Canada

View more Drilling Parts & Accessories

Buffalo RE 26 in. Blower ID: 190671

• Motor:
  • Baldor 20 HP Motor.
  • Volts: 460.
  • RPM: 1765.
  • AMPS: 24.0.
  • Hz: 60.
  • Phase: 3. 
  • Amb.: 40 Degrees Cels.
• Wheel Diameter: 26 In.
• S.O.: J9363 X 3. 

For more details, Please Contact.

View more Centrifugal Blowers 

Greenheck CSW-49 15 HP Fan ID: 222618

• Model: CSW.
• Fan size: 49.
• Arrangement: 10.
• Rotation: Clock Wise.
• Discharge Position: UB.
• Fan Class: 0.
• Motor HP: 15.
• Nominal speed: 1120 rpm.
• Includes matching ABB 15 hp Variable Frequency Drive.
  • Volts: 460.
  • Ph: 3.
• Less than one months run time.
• Location: Western, U.S.A.

 View more Centrifugal Blowers

300 HP Williams Dual Shaft Shredder ID: 278404

• Model: 18125
• Opening: 56 in. x 34 in.
• Hydraulic Driven
• 300 HP John Deere Diesel Engine 
• Diesel Engine Drive Direct to Hydraulics
• Location: Eastern USA

View more Shredders