Equipment Quotes
Wilden 2 in. Double Diaphragm Pump ID: 193077
- Air operated.
- All cast aluminimum construction.
- For more details, Please Contact.
View more Diaphragm Pumps
Manufacturer: | WILDEN |
Caterpillar D11R Dozer ID: 452885
- Model: D11R
- Year: 2006
- Hours: 57,018
- Fuel: Diesel
- Location: Eastern USA
View more Dozers
Cummins 150 kW Diesel Generator ID: 290144
- 150 kW
- 600/347 Volts
- Year: 2017
- Aluminum Sound Enclosure with
- Intake and Exhaust Scoops
- 24 hour UL Tank
- Circuit Breaker
- Location: Eastern Canada
View more Diesel Generators
Kohler 41 kW Natural Gas Generator ID: 120707
- Kohler 41 kW Natural Gas Generator.
- Model: 45RZG.
- 1800 rpm.
- Hours: 437 since new.
- Serial no: 4.3L-11450.
- 277/480V.
- 3 phase.
- 4.3L GM engine.
- 12V electric starter and alternator.
- 277/480V.
- Model: 45RZG.
Please contact us for more information.
Tabor 10 ft. x 20 ft. 2 Deck Incline Screens ID: 486073
- Model: T1140MZ
- Size: 10 ft. x 20 ft.
- Decks: 2
- 3 in. Square Punch Plate Top Screen
- 2 Units Available
- Location: Eastern USA
View more Incline Screens
Metal Compression Technologies MCT-275 Briquetter ID: 234333
- Model: "PuckMaster" MCT-275
- Capacity: Aluminum Chips 1100 lbs/hr (500kg)
- Compacting Pressure: 36,000 psi
- Compression Chamber: 4.5" Dia/114.3mm
- Equipment:
- Hydraulic Power Unit:
- HP: 100
- Volts: 440
- PH: 3
- Hz: 60
- 90 gpm Main Pumps
- 20 gpm Auxiliary Pumps
- Allen Bradley PLC
- Infeed Hopper Capacity:
- 11 cu Yards/8.4 cu m
- Shred Master Shredder:
- Model: 1622
- HP: 30
- 16" x 21.5" Feed Opening
- Auto-Retract Jam Removal
- 20 gpm High-Pressure Pump
- Cross Feeder Screw: to Empty Hopper
- Steel Puck Conveyor
- Saftey System: Hard-Wired Emergency Stop
- High-Pressure Control Valves
- Saftey Grates
- Low Oil Level Shutdown
- Temperature Controls
- New Conveyor
- Updated Software
- Hydraulic Power Unit:
- Location: Eastern USA
View more Recycling Equipment
2012 Caterpillar D6T XW Dozer ID: 236714
- Cab/AC
- SU/Tilit Blade
- Multi-Shank Ripper
- Sweeps
- Rear Screen
- ARO Ready
- Hours: 3722
- Location: Southern USA
View more Dozers
Ameri-Shred Document Paper Shredder ID: 358921
- Model: AMS-1000
- 10 HP
- 208 Volt
- Hours: 20
- Discharge Conveyor
- Location: Southern USA
View more Shredders
Cat 1151 kW Generator ID: 212099
- Cat 3512 Engine:
- HP: 1544.
- Full Torq: 10.5.
- Engine S/N: 24701324.
- C. Generator:
- Type: AT500LB71-4.
- kW: 1600.
- kVA: 2000.
- Output 4160 Volt.
- RPM: 1800.
- Service duty: S1.
- Somer Alternator.
- Includes transfer switch, diesel fuel tank, and muffler system.
View more 1001-1500 kW Generators
Atlas Copco 282 Jumbo Boomer Drill ID: 110729
- Atlas Copco 282 Jumbo Boomer Drill.
- Model: Copco 282 Drift jumbo Boomer.
- Year: 2004.
- Hours: 6012.
- Serial No: AV004A153.
- Hours: 6012.
- Year: 2004.
- Deutz 4 cylinder Tier 3 diesel engine.
- 78 hp @ 2,300 rpm.
- Serial no: 8712104.
- 78 hp @ 2,300 rpm.
- Drills:
- (2) Atlas Copco 1238.
- Feed length: 16 ft.
- (2) Atlas Copco 1238.
- Hydrostatic transmission.
- 24V electrical system.
- FOPS approved telescopic protective roof.
- Model: Copco 282 Drift jumbo Boomer.
- Unit is in good working condition.
- Shipping information:
- Dimensions (L x W x H):
- 38 ft. 4 in. x 7 ft. 6 in. x 9 ft.
- 11.68 m x 2.29 m x 2.74 m.
- Weight: 55,000 lbs / 24, 948 kg.
- Dimensions (L x W x H):
Please contact us for more information.
Manufacturer: | ATLAS COPCO |
2006 Volvo EC 210B LC Excavator ID: 50559
- 2006 Volvo EC 210B LC
- Hours: 5710
- Hydraulic Thumb
- Dig Bucket
- Clean-up Bucket
- Rake
- Forestry Cage
Manufacturer: | VOLVO-PENTA |
Decap Bell Dump Trailer. 8 Ft.W x 32 Ft.L x 8 Ft.H. Air Operated Clam Gates. ID: 45307
Decap Bell Dump Trailer. 8 Ft.W x 32 Ft.L x 8 Ft.H. Air Operated Clam Gates.
Multi-Power Products Discovery 1 Diamond Drill ID: 439239
- Year: 2010
- Complete with
- Kubota 97 HP Engine
- Newer Tower and Wireline Tugger
- 200 BTW 3m Rods
- 80 BW 1.5 Casing
- Spare Heads
- Hyd Pump
- Hyd Motors
- Location: Central Canada
View more Diamond Core Drills
Cedarapids Terex 15 x 24 Jaw Crusher ID: 458450
- Input Size: 15 in. x 24 in.
- New Liners
- Location: Europe
View more Jaw Crushers
Sturtevant SD-80 Air Classifier ID: 1091118
Sturtevant SD-80 Air Classifier
Description: The Side Draft™ (SD) Air Classifier represents a highly versatile, energy efficient system for the consistent separation of particles. The Sturtevant SD Classifier is designed to classify and separate a stream of particles into finer and coarser fractions. It is intended for classifying particles in the 100 to 400 mesh range. The SD Classifier can operate as a stand-alone unit, or as a component in a material processing system. The fine and coarse streams can both be collected for use, further processing, storage, or disposal. Mechanical separator/classifier. Centrifugal action separates particles from dust-laden air. Versatile, variable-speed control to change fineness online.
Make: Sturtevant
Model: SD-80
Condition: Good Used
Equipment Details:
Control Type: Manual
Motor: Min - 60HP
Max - 75HP
Shipping Dimensions: 22'1" Tall x 13'6" Diameter
Shipping Weight: 15,000 Lbs (6818 kg)
General Model Specifications:
Material: Body-Carbon Steel
Liner- Ceramic Tiles
Feed Rate: Min: 75 Ton/Hr
Max: 240 Ton/Hr
- Drive:
- HP: 60
- RPM: 900
- Phase: 3
- Hz: 60
- V: 460VAC
- Frame: 405T
- Gear Reducer: 590 RPM Output Approx.
- Varispeed to adjust Particle Control
- Comments: TEFC, Premium Efficiency, Inverter Duty
- Miscellaneous
- Airflow: 56,000 CFM
- Static Pressure: 24.1 Inches Water
- Weight: 15,000 lbs
- Clearance Height: 9 Feet above Machine for Service
- Clearance Width: 3 Feet on Each Side of Machine For Service
- Location: South Mid-Western USA
See More Micronizers
18 in x 22 ft Channel Conveyor ID: 100820
- 18" Wide x 22' Long
- Receiving Hopper
- Metal Side Boards Running Full Length
- 20 in. dia. head and tail pulley.
- 3hp motor.
- 230/460V.
- Dodge Size TXT2 shaft mount reducer.
- 25 - 1 Ratio
- 4 in. dia. x 20 deg. troughing rollers.